Casio Casio watch MO0506-EA User's Manual

Casio Watches User's Manual - Casio watch MO0506-EA.
Download
Page  of 7
4.9, 1715 votes
background image

Operation Guide 3732

1

MO0506-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully and keep it on hand for later reference
when necessary.

• This watch does not have a time zone that corresponds to the Greenwich

Mean Time differential of –3.5 hours. Because of this, the radio-controlled
timekeeping and Dual Time functions will not display the correct time for
Newfoundland, Canada.

Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.

• Be sure to read “Power Supply” for important information you need to know

when exposing the watch to bright light.

If the digital display of the watch is blank...

If the digital display of the watch is blank, it means that the
watch’s Power Saving function has turned it off to
conserve power.
Power Saving automatically turns off the display and
enters a sleep state whenever the watch is left for a
certain period where it is dark.

• The initial factory default setting is Power Saving on.

• The watch will recover from the sleep state if you move it

to a well-lit area,* if you press any button, or if you angle

the watch towards your face for reading.
* It can take up to two seconds for the display to turn on.

• See “Power Saving” for more information.

Digital display

About This  Manual

• Button operations are indicated using the letters shown

in the illustration.

• Most of the display examples in this manual show only

the digital display, without the analog hands.

• Each section of this manual provides you with the

information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

Stopwatch 1/20
second dial

Minute hand

Hour hand

Second
hand

24-hour dial

Digital display

Battery level dial

General Guide
• Press C to change from mode to mode.

• In any mode, press D to illuminate the face of the watch.

Timekeeping Mode

Press C.

Stopwatch Mode

Recall Mode

Hand Setting Mode

Alarm Mode

Dual Time Mode

• Entering the Stopwatch Mode causes the second hand and battery level dial hand to

move to the 12 o’clock position.

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.
The time calibration signal includes both Standard Time and Daylight Saving Time
(summer time) data.

• This watch is designed to pick up the time calibration signal transmitted in the United

States (Fort Collins, Colorado) and the time calibration signals transmitted in Japan.

• The U.S. time calibration signal can be picked up by the watch while in North

America.*

* The term “North America” in this manual refers to the area that consists of

Canada, the continental United States, and Mexico.

Current Time Setting
This watch automatically adjusts its digital time setting in accordance with a time
calibration signal. You can also perform a manual procedure to set the time and date,
when necessary.

• The first thing you should do after purchasing this watch is to specify your Home

Time Zone, which is the time zone where you will normally use the watch. For more
information, see “To specify your Home Time Zone” below.

• When using the watch outside the range of the U.S. and Japanese time signal

transmitters, you have to adjust the current time setting manually as required. See
“Timekeeping” for more information about manual time settings.

• The analog time of this watch is synchronized with the digital time. Because of this,

the analog time setting is adjusted automatically whenever you change the digital
setting. See “Analog Timekeeping” for more information.

To specify your Home Time Zone

1. In the Timekeeping Mode, hold down A until the GMT

differential value starts to flash, which indicates the
setting screen.

• The second hand will move at high speed to the 12

o’clock position, where it will stop.

• The GMT differential value indicates the time

difference in hours between Greenwich Mean Time
and the currently selected time zone.

• The DST indicator indicates that Daylight Saving Time

(summer time) is turned on for the currently selected
time zone.

l l l l l

ll

ll

ll

ll

ll

ll

l l

DST indicator

GMT differential value

2. Use D (+) and B (–) to select the time zone you want to use as your Home Time

Zone.

• The following are the GMT differential values for major cities in North America and

for Japan. Note that if the time zone you selected is in Daylight Saving Time and
the signal receiving indicator ( ) is on the display (indicating that the watch has
received a signal and has adjusted its GMT differentials for Daylight Saving Time),
you must select the GMT differential values shown in the parentheses.

– 8.0 (DST – 7.0): Los Angeles, San Francisco, Las Vegas, Seattle/Tacoma,

Vancouver, Tijuana

– 7.0 (DST – 6.0): Denver, El Paso, Edmonton, Culiacan
– 6.0 (DST – 5.0): Chicago, Houston, Dallas/Fort Worth, New Orleans, Winnipeg,

Mexico City

– 5.0 (DST – 4.0): New York, Detroit, Miami, Boston, Montreal
+ 9.0: All cities in Japan

• Note that this watch does not have a time zone that corresponds to

Newfoundland.

• Normally, your watch should show the correct time as soon as you specify your

Home Time Zone. If it does not, it should adjust automatically after the next auto
receive operation (in the middle of the night). You can also perform manual receive
or you can set the time manually.

• Selecting –5.0–6.0–7.0–8.0, or +9.0 as your Home Time Zone automatically

turns on auto receive. When auto receive is turned on and you are within the
reception range, the watch will automatically receive the time calibration signal from
the applicable transmitter (in the middle of the night) and update its settings
accordingly. For information about the relationship between time zones (GMT
differential values) and transmitters, see “Transmitters”.

• See the maps under “Reception Ranges” for information about the reception ranges

of the watch.

• If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

• If W60AJ40J60, or OFF starts to flash in place of the GMT differential value

when you hold down A in step 1 of the above procedure, press A again to exit the
setting screen. After that, press B and then perform step 1 again.

To display the digital time and last signal screen

• In the Timekeeping Mode, press A to cycle through the digital time screens as

shown below.

• In the Timekeeping Mode, press B to display the last signal screen. The last signal

screen shows the date and time of the last successful time calibration signal
reception.

Press A.

Last Signal Screen

Day of week

Month – Day

Press B.

Year  Month – Day

Hour : Minutes

PM indicator

Seconds

Receive time

Receive date

• The last signal screen remains on the display for about one or two minutes. After

that, the Timekeeping Mode screen reappears.

Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive. The second hand stops at the 12 o’clock position
while time calibration signal reception is in progress. After reception is complete, the
second hand moves automatically until it matches the digital time.

• Auto Receive
With auto receive, the watch automatically picks up the time calibration signal five
times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more
information, see “About Auto Receive”.

3. Press A to exit the setting screen.

• The second hand will advance at high speed to the correct position in accordance

with the seconds count of the digital time, and resume normal movement from
there.

• Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.

0.609432s