Casio Casio Watch MA1107-EB User's Manual

Casio Watches User's Manual - Casio Watch MA1107-EB.
Download
Page  of 1
4.5, 1402 votes
background image

1

Operation Guide 5211

MA1107-EB

 Your watch may differ somewhat from the one shown in the illustration.

 

Minutes

Day-night indicator  

(disk)

Hour

Stopwatch  

minutes

Seconds

Stopwatch seconds

Day

Crown  

(Normal position)

First click  

(Day setting)

Second click  

(Time setting)

 The day-night indicator performs one rotation every 24 hours. A day sky image is 

 

shown during the day and a night sky image is shown at night.

To set the time

 Pull out the crown to the second click.

1. 

 This will cause the second hand to stop.

 

 Set the hands by rotating the crown. Move the minute hand four or five minutes 

2. 

past the time you want to set, and then back it up to the proper setting.

 Carefully set the time, making sure to distinguish between AM and PM.

 

 Push the crown back in to the normal position to restart timekeeping.

3. 

 This will cause the second hand to restart.

 


To set the day

 Pull out the crown to the first click.

1. 

 Set the day by rotating the crown.

2. 

 Push the crown back in to the normal position.

3. 

 Avoid setting the day between 9:00 p.m. and 1:00 a.m. (the day display may not 

 

change in the following day).

Using the Stopwatch
The stopwatch lets you measure elapsed time up to 59 minutes, 59 seconds. You 

can also correct the position of the stopwatch second hand when necessary.
To measure elapsed time

 Press 

1. 

A

 to start the stopwatch.

 Press 

2. 

A

 to stop the stopwatch.

 You can resume the measurement operation by pressing 

 

A

 again.

 Press 

3. 

B

 to reset the stopwatch.

Notes

 The stopwatch second hand wil  continue moving until you stop it. Be sure 

 

to stop and reset the stopwatch after you are finished using it. Leaving the 

stopwatch running will run down the watch’s battery.

Adjusting the Stopwatch Second and Minute Hand Positions
Use of the stopwatch can cause the starting positions of the stopwatch minute 

hand and second hand to become misaligned. Use the following procedure to 

check hand alignment and to adjust the positions of the hands so they point to 

12 o’clock when the stopwatch is reset.
To adjust the positions of the stopwatch hands

 Press 

1. 

B

 to reset the stopwatch, and check the alignment of the stopwatch 

minute hand and second hand.

 Pull out the crown to the second click.

2. 

 Press 

3. 

A

 to move the stopwatch second hand forward until it points to 

12 o’clock.

 If the stopwatch minute hand is aligned correctly, proceed to step 5. If the 

4. 

stopwatch minute hand is also misaligned, press B so the stopwatch minute 

hand jumps to 

60.

 After making the adjustments you want, push the crown back in to its normal 

5. 

position.

 Note that pulling the crown out also stops hour and minute hands. After 

 

performing the above procedure, you should also adjust the timekeeping setting.

For a watch with an elapsed time bezel

 

Rotate the elapsed time bezel to align the 

 mark with the 

minute hand.

After that, you wil  be able to determine how much time has 

elapsed since you adjusted the bezel position by checking the 

bezel value that the minute hand is currently pointing to.

Elapsed time bezel

 Some water resistant models are equipped with a screw 

 

lock crown.

 With such models, you must unscrew the crown in the 

 

direction noted in the illustration to loosen it before you can 

pull it out. Do not pull too forcibly on such crowns.

 Note that a screw lock crown watch is not water resistant 

 

while its crown is loose. Be sure to screw the crown back in 

as far as it will go after configuring settings.

Specifications

Accuracy at normal temperature:  ± 20 seconds a month
Display:  3 analog hands (timekeeping hour and minutes, stopwatch seconds),  

3 dials (stopwatch minutes, day-night indicator, timekeeping seconds), day

Stopwatch function:  Measuring capacity: 59 minutes, 59 seconds 

Measuring unit: 1 second/Measuring mode: Elapsed time

Battery:  One silver oxide battery (Type: SR626SW)

Approximately 2 years on type SR626SW (assuming one stopwatch operation 60 minutes 

per day)

0.584943s