Casio Casio Watch 2622 User's Manual

Casio Watches User's Manual - Casio Watch 2622.
Download
Page  of 3
4.6, 2292 votes
background image

User’s Guide 2622

1

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

(Light)

Alarm Mode

Countdown Timer Mode

Stopwatch Mode

City Temperature Mode

Press

C.

Timekeeping Mode

e-DATA MEMORY Mode

World Time Mode

Press

D.

Screen

           56

OFF

TYO

P

10:58

12H

2003

6-30

To do this:

Reset the seconds to 00

Toggle between Daylight Saving Time (ON)
and Standard Time (OFF)

Change the city code

Change the hour or minutes

Toggle between 12-hour (12H) and
24-hour (24H) timekeeping

Change the year

Change the month or day

Do this:

Press D.

Press D.

Use D (east) and B (west).

Use D (+) and B (–).

Press D.

Use D (+) and B (–).

DST indicator

Text

Record number  
(Page number)  

Remaining memory (%) 

Remaining Memory Screen

General Guide

• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.
• Pressing D in the Timekeeping Mode cycles through available screen formats as

shown below.

Seconds 

Hour : Minutes 

PM indicator 

Day of week 

World Time Mode time  
(Hour: Minutes)  

Month – Day 

World Time Screen

Month – Day Screen

Day of the Week Screen

Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting
screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Minutes

12/24-Hour 
Format

Seconds

City Code

Hour

Year

Day

DST

Month

3. When the setting you want to change is flashing, use D and B to change it as

described below.

• For full information on city codes, see the “City Code Table”.
• See “Daylight Saving Time (DST)” for details about DST setting.

4. Press A to exit the setting screen.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range
of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting
screen.

2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (ON)

and Standard Time (OFF).

4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

e-DATA MEMORY

You can use the watch’s e-DATA MEMORY to store e-mail
addresses, Web page URLs, and other text data.
• All of the operations in this section are performed in the

e-DATA MEMORY Mode, which you enter by pressing
C.

e-DATA MEMORY Management
e-DATA MEMORY can hold up to 315 characters total,
while each record can contain up to 63 characters. The
maximum number of records depends on the number of
characters per record, as shown below.
• 63 characters per record: 5 records
• 7 or fewer characters per record: 40 records

To create a new e-DATA MEMORY record

1. In the e-DATA MEMORY Mode, press D and B at the

same time to display the remaining memory screen.
• If 0 % is shown for remaining memory, it means that

memory is full. To store another record, you will first
have to delete some of the records stored in memory.

2. Hold down A until the flashing cursor ( #) appears on

the display, which indicates the setting screen.
• The setting screen also shows the record number that

is automatically assigned to the new record.

3. Input the text you want.

• When inputting the text, use D (+) and B (–) to

cycle through characters at the current cursor
location, and C to move the cursor to the right. See
“Inputting Text”.

4. Press A to store your data and return to the e-DATA MEMORY record screen

(without the cursor).

• Pressing A causes the message SET to appear for about two seconds as the data

is stored. After that, the e-DATA MEMORY record screen appears.

• The text can show only three characters at a time, so longer text scrolls continuously

from right to left. The last character is indicated by the symbol s after it. Press A to
stop and restart scrolling.

• Records are stored in memory in the sequence they are created.

To recall e-DATA MEMORY records
In the e-DATA MEMORY Mode, use D (+) and B (–) to cycle through e-DATA
MEMORY records as shown below.

Press .

Press .

Remaining
memory 
screen

Record 1

(

)

Record 2

(

)

• The value on the remaining memory screen is the

percentage of memory that is still available. It does not
indicate the number of records that can be stored.

MA0305-A

0.609392s