Casio Casio Watch 2223-1 User's Manual

Casio Watches User's Manual - Casio Watch 2223-1.
Download
Page  of 3
4.4, 2052 votes
background image

Module No. 2223

2223-1

GENERAL GUIDE

• Press C to change from mode to mode.

• Pressing L in any mode (except Stopwatch Mode) illuminates the display for about 2 seconds.

• Pressing D in the Stopwatch Mode illuminates the display for about 2 seconds.

• If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.

Timekeeping Mode

Stopwatch Mode

Recall Mode

World Time Mode

Alarm Mode

Press C.

TIMEKEEPING MODE

• With 12-hour timekeeping, times between noon and mid-

night are indicated by P (pm), while no indicator appears
for times between midnight and noon.

• No indicator appears for any time while 24-hour time-

keeping is selected.

To set the time and date
1. While in the Timekeeping Mode, hold down A until the

seconds digits flash on the display, indicating the set-
ting screen.

2. Press C to move the flashing in the sequence shown below.

DST

Seconds

Month

Day

City code

Minutes

Year

Hour

12/24

3. While the seconds setting is selected (flashing), press D to reset it to 00. If you

press  D while the seconds setting is in the range of 30 to 59, the seconds are
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of
00 to 29, the minutes count is unchanged.

• This watch lets you select one of 27 city codes as your home time city.

• Note that if you want to change your home time city, you must change the city code

first, and then change the DST∗ setting.

• While the DST setting is selected, press D to toggle it on ( ) and off ( ).

• The DST on/off setting you make for the city code that is currently selected in the

Timekeeping Mode (your home time city) is also applied to that city code in the
World Time Mode.

• While the city codes setting is selected, use D(+) and B(–) to scroll through the

available codes until the one you want to use as your home time city is displayed.

• For full information on city codes, see the “CITY CODE TABLE”.

• While the 12/24-hour setting is selected, press D to toggle it between 12 and 24.

• While any other setting is selected (flashing), press D(+) or B(–) to change it.

Holding down either button changes the setting at high speed.

4. After you make the settings you want, press A to exit the setting screen.

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 2000 to December 31, 2039.

• The watch’s built-in full automatic calendar automatically makes allowances for dif-

ferent month lengths and leap years. Once you set the date, there should be no
reason to change it except after the replacement of the watch’s battery.

∗ Daylight Saving Time (DST), which is also sometimes called “summer time” ad-

vances the time for one hour, as is the custom in some areas during the summer.
Remember that not all countries or even local areas use Daylight Saving Time.

ABOUT THE BACKLIGHT

• Pressing L in any mode (except Stopwatch Mode) illuminates the display for about

2 seconds.

• Pressing D in the Stopwatch Mode illuminates the display for about 2 seconds.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

• Frequent use of the backlight shortens the battery life.

• The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction of the watch.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The backlight automatically turns off whenever an alarm sounds.

Hour

Minutes

Seconds

DST on indicator

Day

Month

Day of week

PM indicator

STOPWATCH MODE

About Laps and Splits

Lap Times
A lap time is the amount of time it takes for you to get from one point to
another during a race. When running on a track, for example, you can time
how long it takes you to complete each lap.

Split Times
A split time is the time from the start of a race until the point that the split is
measured. For example, you could measure split times to determine how
long it takes for you to get from the starting line to the 5-kilometer mark, the
10-kilometer mark, etc.

The Stopwatch Mode lets you measure elapsed time, lap
times, and split times. The range of stopwatch is 99 hours,
59 minutes, 59 seconds. You can use the EL backlight by
pressing D at any time while the stopwatch is operating.
The Stopwatch Mode also lets you store the lap times for
multiple laps in memory for later recall when you need
them.
This watch manages data according to RUN, which are
made up of multiple data records. All data stored from the
start of the stopwatch operation to the end of the stop-
watch operation makes up one RUN. Within a RUN, each
lap/split operation stores one record. The watch can hold
up to 500 data records in memory.
The final time recorded when you stop the stopwatch op-
eration is recorded as the final lap time.

The first hour of a stopwatch operation is measured in units of 1/100 second. After
that, elapsed time is measured in units of one second.

Minutes

Seconds

1/100 second

 [Up to 1 hour]

 [After 1 hour]

Split time

Lap time

Hours

Minutes

Seconds

Split time

Lap time

<Example 1>
The following operation causes one RUN, which consists of three data records, to be
stored into memory.

Start

1 set

1 set

RUN

1 set

Stop and
Clear

1st
Lap/Split

Data stored

Data stored

Data stored

2nd
Lap/Split

<Example 2>
If you do not perform a lap/split operation, the RUN is made up of a single data
record.

Start

1 set = 1 RUN

Data stored

Stop and
Clear

To measure elapsed time
1. Press L to start the stopwatch.
2. Press B to stop the stopwatch.

• You can resume the elapsed time measurement operation by pressing L again.

• You can stop the elapsed time measurement operation by pressing B again.
3. While the elapsed time is stopped on the display, press B to clear the stopwatch

to all zeros.

Mode indicator

Minutes

Seconds

1/100 second

RUN number

0.574166s