Casio Casio Watch 1935 User's Manual

Casio Watches User's Manual - Casio Watch 1935.
Download
Page  of 3
4.3, 2266 votes
background image

1934/1935-1

GENERAL GUIDE

• If the digital display of your watch is continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.

• The operational procedures for Module 1934 and 1935 are identical. All of the illustrations in this manual show Module 1934.

• Press D to change from mode to mode.

• Module 1935 has a display with white figures on a black background.

TIMEKEEPING MODE

In the Timekeeping Mode you can view the current time and current date for your
home time zone, as well as the current time in one other time zone.

• You can separately specify one of 40 cities around the world for your Home Time

and Dual Time. See the “CITY CODE TABLE” at the back of this manual for a list of
available time zones.

• To switch between the Home Time and Dual Time screens, hold down B for about

two seconds. The DUAL indicator remains on the display in all modes while the
Dual Time screen is selected.

• Pressing B while the Home Time screen is on the display shows the city code of

the Dual Time, followed by the current time in that city. After a few moments, the
display changes back to the Home Time Screen. Pressing B while the Dual Time
screen is on the display momentarily shows the Home Time city code and then
time.

• To display the Date screen, press C. The Home Time date appears if C is pressed

while the Home Time screen is displayed, while the Dual Time date appears if C is
pressed while the Dual Time screen is displayed. In either case, the display changes
back to the time screen after a few moments.

• Whenever you enter the Timekeeping Mode, the display first shows the city code

(for either the Home Time or Dual Time, depending on what screen was on the
display the last time you left the Timekeeping Mode), and then the current time in
that city.

To set the time and date
Times and dates are linked, so changing the setting for any time zone (city) automat-
ically changes the setting for all other time zones. The following time and date setting
procedure is explained using the Home Time screen, but you can also change set-
tings using the Dual Time screen. See “To select a city code” for details on selecting
a time zone for the Home Time and Dual Time screens.

1. In the Timekeeping Mode, hold down B until the Home

Time Screen appears.

2. Hold down C until the city code starts to flash. The city

code flashes because it is 

selected.

3. Use A and B to scroll through the city codes until you

find the one you want to set as your home city.

• B scrolls forward, while A scrolls back through city

codes. Holding down either button scrolls through the
city codes at high speed.

• See the “CITY CODE TABLE” at the back of this manu-

al for a complete list of available codes.

4. Press D to change the selection in the sequence below.

• See “To switch between standard time and daylight saving time” for details on DST

On/Off setting.

5. While the seconds digits are selected (flashing), press

B to reset the seconds to 

AA. If you press B while the

seconds count is in the range of 30 to 59, the seconds
are reset to 

AA and 1 is added to the minutes. If the

seconds count is in the range of 00 to 29, the minutes
count is unchanged.

6. While hour, minutes, year, month, or day is selected (flashing), press B to in-

crease the setting or A to decrease it. While the 12/24-hour setting is selected,
press B to switch between the two formats.

• Holding down either button changes the current selection at high speed.

• When the 12-hour format is selected, the BCL indicator appears on the display.

With the 12-hour format, the PM indicator appears on the display to indicate “p.m.”
times. There is no indicator for “a.m.” times. Selecting the 24-hour format causes
the 

CZL indicator to appear on the display.

7. After you set the time and date, press C to return to the Timekeeping Mode (Home

Time screen).

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

City Code

Hour

Seconds

DST 
On/Off

Minutes

12/24-Hour format

Month

Day

Year

to

to

(space)

Press     . 

Press     . 

Timekeeping Mode

Data Bank Mode

Alarm Mode

Stopwatch Mode

Press D.

[Module 1935]

[Module 1934]

Home Time

Dual Time

Date

Hour : Minutes

City Code

DUAL indicator

Month - Day

DATE indicator

Seconds

Day of week

City  Code

To select a city code
1. In the Timekeeping Mode, hold down B for about two seconds to display the Dual

Time screen.

• The Dual Time screen is the one with the DUAL indicator.

• If you want to change the Home Time city code, display the Home Time screen

instead of the Dual Time screen.

2. Hold down C until the city code starts to flash.
3. Use A and B to scroll through the city codes until you find the one you want to set.

• B scrolls forward, while A scrolls back through city codes. Holding down either

button scrolls through the city codes at high speed.

• See the “CITY CODE TABLE” at the back of this manual for a complete list of

available codes.

4. After you select a city code, press C to return to the Timekeeping Mode.

To switch between standard time and daylight saving time
Daylight Saving Time (DST), which is also sometimes called “summer time,” advanc-
es the time for one hour, as is the custom in some areas during the summer. Remem-
ber that not all countries or even local areas use Daylight Saving Time.

1. In the Timekeeping Mode, use B to display the time screen (Home Time or Dual

Time) whose Daylight Saving Time setting you want to change.

2. Hold down C until the city code starts to flash.

3. Use D to select the DST On/Off setting.

• The DST indicator flashes along with the current on (AN)/

off (

Af) setting.

4. Press B to toggle Daylight Saving Time on and off.
5. After you are finished making the setting you want, press

C to return to the Timekeeping Mode.

• The  DST indicator appears on the display to indicate

that daylight saving time is turned on.

• The daylight saving time setting you make is applied

only to the time (Home Time or Dual Time) whose screen
is on the display when you start the above procedure.
You have to make separate settings for Home Time and
Dual Time.

DATA BANK MODE

The Data Bank Mode lets you store up to 30 pairs of name
and telephone number data. Data is automatically sorted
based on the characters of the name. You can recall data
by scrolling through it on the display.

• See the “CHARACTER LIST” at the back of this manual

for details on how the watch sorts data.

• The Remaining Memory Screen appears when there is

no data stored in memory, or when you scroll to the lo-
cation between the last and the first data items stored in
memory.

• The name screen of the data item on the display when

you exit the Data Bank Mode appears first the next time
you enter the Data Bank Mode.

• If you do not operate any button for a few minutes while

in the Data Bank Mode, the watch automatically goes
back to the Timekeeping Mode.

To input new Data Bank data

1. In the Data Bank Mode, press B until the remaining

memory screen appears.

• If the message FULL appears on the display, it

means that memory is full. To store more data, you will
first have to delete some of the data stored in memory.

2. Hold down C until the flashing cursor appears on the

display.

• A separator is input automatically between the last char-

acter and the first character of the data.

• The  NAME indicator appears when the cursor is cur-

rently located in the text field.

3. Use A and B to change the character at the cursor position in the text field. The

character changes in the following sequence.

• Holding down either button changes the character at high speed.

4. When the character you want is at the cursor position, press D to move the cursor

to the right.

5. Repeat steps 3 and 4 until your text is complete.

• You can input up to eight characters in the text field.
6. After you input a name, use D to move the cursor to the number field.

• The NAME indicator is cleared and the TEL indicator appears when the cursor is in

the number input field.

• You can input up to eight characters for the name. After you input the eighth char-

acter, pressing D causes the cursor to jump to the first digit of the number.

• You can input up to 12 digits for the number. After input the twelfth digit, pressing D

causes the cursor to jump back to the first character of the name.

7. Use A and B to change the character (space, number, or hyphen) at the cursor

position in the number field. The character changes in the following sequence.

• Holding down either button changes the character at high speed.

DST indicator

Mode indicator

Name

[Remaining Memory Screen]

NAME indicator

Separator

Cursor

to

(space)

Press     .

Press     .

?

?

0.614349s