Casio 5069 User's Manual

Casio Watches User's Manual - 5069.
Download
Page  of 3
4.1, 1118 votes
background image

Operation Guide 5069

1

MO0906-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.

What to do if the bottom dial hand is stopped

The watch is shipped from the factory with the bottom dial
hand stopped in order to conserve battery power. Even
though the bottom dial hand is stopped, the watch
continues to maintain the current time internally. If the
bottom dial hand is stopped when you purchase the
watch, press any one of the watch’s buttons to start hand
movement.

30

Bottom dial hand

About This  Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.

• The bottom dial is a disk that rotates to indicate various

types of information, depending on the mode.
- During regular timekeeping, the thick line of the disk

indicates the current second. In other modes, the thick
line on the disk will indicate the day of the week, the
alarm ON/OFF setting, and the DST ON/OFF setting.

- When setting the date, the disk rotates so the arrow

mark at the top of the dial points to the value that
represents the ones digit of the current year setting.
During a stopwatch operation, the dial rotates at one
revolution per second. The 1/20-second count is the
value indicated by the arrow mark at the top of the dial.

General Guide

30

30

30

30

30

Alarm Mode

Press C.

Press C.

Press A.

Hold down A
for about three seconds.

World Time  Mode

Timekeeping Mode

Stopwatch Mode

Press B or D.

Press D.
(When the stopwatch
is reset.)

Time/Date Adjustment

Press C.

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date, and to switch between Standard Time and
Daylight Saving Time (summer time).

• Daylight Saving Time (summer time) advances the time

setting by one hour from Standard Time. Remember that
not all countries or even local areas use Daylight Saving
Time.

• Pressing A in the Timekeeping Mode will cause the

bottom dial hand to move to the current day of the week.
Also, the indicator hand will move to the city code that is
currently selected as your Home City.
Press A to return to regular timekeeping. The watch
also will return to regular timekeeping if you do not
perform any operation for about three seconds.

30

30

30

Hour hand

Indicator hand

Minute hand

Left dial
hand

Bottom dial
hand

Day

Day of week

City code

Press A.

▲▲

To set the time and date

1. In the Timekeeping Mode, hold down A for about three

seconds until the watch beeps.

• The indicator hand will move to the city code that is

currently selected as the Home City. This is the city
code setting mode.

• The bottom dial hand also will indicate the current

DST on/off setting at this time.

2. Press D to move the indicator hand clockwise, until it

points at the city code you want to select as your Home
City.

• For full information on city codes, see the “City Code

Table”.

3. Press B to toggle the DST setting indicated by the

bottom dial hand on or off.

• Even after you change the DST setting, you still can

use D to select a different Home City code if you
want.

30

Indicator hand

Bottom dial hand

4. After the Home City and DST settings are the way you

want, press C.

• This will cause the watch to beep and the indicator

hand to move to the 12 o’clock position. This is the
time setting mode.

• All hands (except for the indicator hand and the

bottom dial hand) and the day display will change
automatically to the current time and date settings for
the selected city code.

• All button operations are disabled while the hands and

day display are changing.

5. Use D (+) and B (–) to change the time (hour and

minute) setting.

• As you set the time, take care to ensure that the

left dial hand also indicates the correct 24-hour
timekeeping hour.

6. After the time setting is the way you want, press C.

• This will cause the watch to beep and change to the

year setting mode.

30

Hour hand

Indicator hand

Minute hand

Left dial hand

7. Use D and B to change the year setting.

• You can set the year within the range of 2001 to 2099.

• Use B to move the indicator hand clockwise to the

value of the tens digit that you want to specify. To set
2012, for example, move the hand to 10.

• Use D to rotate the bottom dial so the ones digit you

want to specify is at the top (under the 

 mark). To

set 2012, for example, rotate the dial until 2 is at the
top as shown in the illustration.

8. After the year setting is the way you want, press C.

• This will cause the watch to beep and change to the

month setting mode.

30

00

10

20

30

90

40

50

60

70

80

2

1

0

9

8

7

6

5

3

4

Indicator
hand

Bottom dial
hand

Setting the year (10s digit)

Setting the year (1s digit)

9. Use D to move the indicator hand clockwise to the

month you want to specify. To set June, for example,
move the hand to 6 (Jun).

10. After the month setting is the way you want, press C.

• This will cause the watch to beep and change to the

day setting mode.

11. Use D (+) and B (–) to change the day setting.

• When setting the day, the watch automatically will

skip days (30 and 31) that are not included in the
currently selected month. If you can’t select 30 or 31
when you want to, check to make sure that the
proper month is selected.

• You can return to the time setting mode after

configuring the day setting by pressing C.
Pressing C will cause the watch to beep twice.

30

Dec

Jan

Feb

Mar

Sep

Oct

Nov

Apr

May

Jun

Jul

Aug

Setting the Month

30

30

Day

Indicator hand

Month

12. After all of the settings are the way you want and the day display is no longer

changing, press A. This will cause the bottom dial hand to start moving again and
the other hands to start moving from their current positions.

• You can press A at any time during the above procedure to return to regular

timekeeping.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.

Stopwatch

The stopwatch lets you measure elapsed time.

• When you enter the Stopwatch Mode, the bottom dial

hand moves to 12 o’clock and the right dial hands move
to 12 o’clock.

• You can start elapsed time measurement with the

stopwatch while the watch is in the Stopwatch Mode or
the Timekeeping Mode.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.95 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• You can switch to another mode from the Stopwatch

Mode only while the stopwatch is stopped and reset.

30

Indicator hand

Stopwatch
1/20 seconds

Stopwatch
minutes

Stopwatch hours
(24-hour format)

To start an elapsed time operation while in the Stopwatch Mode
1. In the Timekeeping Mode, press D to enter the Stopwatch Mode.
2. In the Stopwatch Mode, press B to start elapsed time measurement.
3. Press B to stop elapsed time measurement.

• You can restart and stop elapsed time measurement as many times as you like by

pressing B.

• The bottom dial hand indicates 1/20 seconds during the first 60 seconds only, and

then stops. When elapsed time measurement is stopped (by pressing B), the
bottom dial hand will jump to the 1/20 second indication (which is kept internally).

4. Check the elapsed time.

• After you are finished measuring elapsed time, press D to reset the stopwatch. The

stopwatch will stop and reset even if you press D while elapsed time measurement
is in progress.

• To return to regular timekeeping, press D while the stopwatch is reset.

30

Hour hand

Minute hand

Day

Bottom dial hand

Indicator hand

Left dial
hand

Right dial hands

0.619554s