Casio 3793 User's Manual | Page 2

Casio Clock Radio User's Manual - 3793.
Download
Page  of 3
4.4, 1680 votes
background image

2

Operation Guide 3793

Name  

Record number  

Number  

Remaining 
memory  

Telememo

Telememo lets you store up to 30 records, each
containing name and telephone number data. Records
are automatically sorted based on the characters of the
name. You can recall records by scrolling through them on
the display.

• A Telememo Mode record has a name field and a

number field.

• See “Character List” for details on how the watch sorts

records.

• All of the operations in this section are performed in the

Telememo Mode, which you enter by pressing B.

New Data Screen

To create a new Telememo record

1. In the Telememo Mode, press C and D at the same

time to display the new data screen.

• The new data screen shows ___, which indicates

that there is no text in the name field.

• If the new data screen does not appear, it means that

memory is full. To store another record, you will first
have to delete some of the records stored in memory.

2. Hold down A until the flashing cursor ( _) appears in

the name field of the display, which indicates the setting
screen.

3. Use D and C to change the character at the cursor

position in the name field. The character changes in the
following sequence.

(space)

to

to

to

Press .

Press .

• You can input spaces, alpha characters, symbols, and numbers in a name. For

details, see the “Character List”.

4. When the character you want is at the cursor position, press B to move the cursor

to the right.

5. Repeat steps 3 and 4 until the name is complete.

• You can input up to eight characters for the name.

6. After you input the name, press B as many times as

necessary to move the cursor to the number field.

• You tell when you are in the name field because of

the long cursor ( _). The number field has a short
cursor ( _).

• The name field has spaces for eight characters, so

you must press B to move the past the 8th character
in order to get to the number field.

• The number field has spaces for 16 digits. Pressing

B until the cursor moves past the 16th digit causes it
to jump back to the first character of the name field.

7. Use D and C to change the character at the cursor position in the number field.

The character changes in the following sequence.

(space)

to

Press .

Press .

8. When the character you want is at the cursor position, press B to move the cursor

to the right.

9. Repeat steps 7 and 8 until you complete number input.

• You can input up to 16 digits for the number.

10. Press A to store your data and return to the Telememo record screen (without

the cursor).

• After you press A to store data, the name flashes for about one second to indicate

that records are being sorted.

• Note that a record must have something input in the name field, otherwise you will

not be able to store it.

To recall Telememo records
In the Telememo Mode, press D (+) to scroll through Telememo records on the
display.

• Only name data appears when you scroll through Telememo records.

• Press A to toggle the screen between the name and number fields.

Press     .

Name

 Number

• The name and number scroll from right to left on the display. A separator ( <) is

inserted between the last character and first character of the data.

• Pressing D while the last Telememo record is on the display causes the new data

screen to appear.

To edit a Telememo record
1. In the Telememo Mode, use D to scroll through the records and display the one

you want to edit.

2. Hold down A until the flashing cursor appears on the display.
3. Use B to move the flashing to the character you want to change.
4. Use C and D to change the character.

• For details on inputting characters, see “To create a new Telememo record” (step

3 for name input and 7 for number input).

5. After making the changes that you want, press A to store them and return to the

Telememo record screen.

To delete a Telememo record
1. In the Telememo Mode, use D to scroll through the records and display the one

you want to delete.

2. Hold down A until the flashing cursor appears on the display.
3. Press C and D at the same time to delete the record.

• CLR appears to indicate that the record is being deleted. After the record is

deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Telememo record screen.

City code  

Current time for the  
selected city code  

World Time

World Time digitally displays the current time in 30 cities
(29 time zones) around the world.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing B.

World Time
The time settings of the Timekeeping Mode and the World
Time Mode are independent of each other, so you must
make separate settings for each. This watch is preset with
a number of city codes, each of which represents the time
zone where that city is located.

• Whenever you change the time setting for any city in the World Time Mode, the

settings of all other cities are changed accordingly.

• If your location is not included in the preset city codes, select the preset city code

that is in the same time zone as your location.

• For full information on city codes, see the “City Code Table”.

To set the World Time

1. In the World Time Mode, press D to scroll through city

codes.

2. Hold down A until the DST On/Off setting of the world

time starts to flash, which indicates the setting screen.

3. Press B to move the flashing in the sequence shown

below to select the other settings.

DST

Minutes

Hour

4. While a setting is flashing, use D and C to change it.

• Pressing D and C at the same time while any World Time setting is flashing

causes the displayed time to change to the same setting as the current
Timekeeping Mode time.

• While DST On/Off setting is selected (flashing), press D to toggle between

Daylight Saving Time (ON) and Standard Time (OFF).

• While the hour or minutes setting is selected (flashing), use D (+) and C (–) to

change it.

5. Press A to exit the setting screen.

To view the time in another city code
In the World Time Mode, press D to scroll through city codes.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

whose Standard Time/Daylight Saving Time setting you
want to change.

2. Hold down A until the DST On/Off setting of the world

time starts to flash, which indicates the setting screen.

3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the World Time Mode

display to indicate that Daylight Saving Time is turned
on.

• The above operation toggles all World Time city codes

between Daylight Saving Time and Standard Time. Note
that you cannot make settings for individual city codes.

DST indicator 

Alarms

You can set three independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached. One of the alarms is a snooze alarm,
while the other two are one-time alarms.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.

• There are four screens in the Alarm Mode. Two are for

one-time alarms (indicated by numbers AL1and
AL2

), one is for a snooze alarm (indicated by SNZ),

and one is for the Hourly Time Signal (indicated by
SIG

).

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing B.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is
displayed.

• To set a one-time alarm, display one of the screens

indicated by an alarm number AL1or AL2. To set the
snooze alarm, display the screen indicated by SNZ.

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation automatically turns on the alarm.

3. Press B to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and C (–) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, or until you turn the alarm off .

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode digital time.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen
Displaying the SNZ setting screen

AM indicator  

Alarm time  
(Hour : Minutes)  

0.599066s