Cardo scala rider G9 Owner's Manual | Page 9

Cardo Headphones Owner's Manual - scala rider G9.
Download
Page  of 22
4.9, 1794 votes
background image

5.1

 “ONE+8” INTERCOM TOGGLING MODE

Pair with up to 8 other G9 devices (“One+8” Buddies) and 

connect with one at a time by pronouncing their name.

5.1a CONFIGURING YOUR G9 BUDDY NAME

“One+8” Intercom Toggling al ows you to connect to a “One+8” 

Buddy by simply saying the Buddy Name they assigned to their G9.

IMPORTANT! Before using “One+8” Intercom, you should assign 

your G9 device(s) a Buddy Name, so that other “One+8” participants 

can call you by this name. 

 

If you change your G9 Buddy Name, you must Flash Pair again with 

your “One+8” Buddies for their G9 to receive your new Buddy Name.

Visit the Cardo Community to assign your G9 device’s Buddy Name. 

See Section 3 for more details.
Until you assign a Buddy Name to your G9, it will be known by its 

generic “One+8” Buddy name, “scala rider”. 

To hear the name you have chosen for your G9

Hear Your Buddy 

Name

In Standby, tap “VC” and “B” simultaneously. 

You will hear the Buddy name of your G9 

through the speakers.

5.1b PAIRING WITH A “ONE+8” INTERCOM BUDDY 

Flash-Pairing
Use Flash-Pairing to add a new “One+8” Buddy within 

seconds.

1.  Remove both G9 units from their Audio Kits and check they are 

in Standby Mode (slow single blue flashing). 

2.  Bump the two G9 units gently against each other and hold them 

side by side. 

CLICK !

3.   If  Flash-Pairing was successful, a purple light appears for 

2 seconds.

NOTE: If your scala rider G9 already has a full list of 8 paired 

“One+8” Intercom Buddies, pairing another buddy wil  replace the 

buddy that you have not spoken to for the longest time.

 Pairing Online – Cardo Community®

You can find your friends and add them to your “One+8” Buddy list 

via the Cardo Community website at: 

http://community.cardosystems.com

5.1c PAIRED DEVICE INDICATION

You can see which G9 units within a range of 60ft./20m are your 

“One+8” Intercom Buddies. 

1. Press “VC” for 5 seconds.

2.  If  your  G9 and another nearby G9 are paired as “One+8” Buddies, 

the LEDs on both units will turn PURPLE for 2 seconds. 

3.  If they aren’t paired as “One+8” Buddies, pair them in seconds 

using Flash-Pairing (see Section 5.1b).

English

scala rider® G9 / G9 PowerSet 

9

scala rider® G9 / G9 PowerSet 

0.473709s