Canon S630 Instruction Guide

Canon Printers and Multifunction Instruction Guide - S630.
Download
Page  of 2
4.4, 2495 votes
background image

Install the Ink Tanks

Unpack the Printer

2

3

4

5

Prepare the Printer

Install the Printhead

Color Bubble Jet™ Printer

Connect the Printer 

To Your Computer

Start Here

Easy Setup Instructions 

IMPORTANT: Be sure printer is off 
before continuing, or the computer 
will attempt to install the printer 
driver before the printer is ready.

Turn the printer off.

Connect one end of the USB cable 
to the computer, the other to the printer.

For Parallel Cables:

Turn the printer off.

Connect one end of the parallel cable to 
the computer, the other to the printer.

IMPORTANT: Be sure printer is off 
before continuing, or the computer 
will attempt to install the printer 
driver before the printer is ready.

Continue with Step 6

on side two.

1

2

1

2

For USB Cables:

Canon USA              S630 boxtop.ai
Clarity                           22 June 2001

(IEEE 1284 compliant)

Parallel cable

Parallel port

Secure 

wire clips

Parallel cable

USB port

USB cable

Protective cap

Pull the orange tab off the yellow ink tank 
(BCI-3eY), then remove and discard the 
plastic wrapper.

Twist off and discard the orange 
protective cap.

NOTE: To avoid spilling ink, never press on 

the sides of an ink tank.

Insert the ink tank into the correct slot.
(Refer to the color guide on the printhead.)

Press down gently until the ink tank locks
into place.

Insert the remaining three ink tanks into
their assigned slots.

Close the front cover and attach the 
paper rest and output tray. 

2

1

3

4

5

Electrical contacts

Slide the printhead into the holder. The 
printhead will rest at a slight angle. 
Do not press it down.

Remove the printhead from its package.

Turn the printhead over, then remove 
the orange protective cap. 

NOTE: Do not touch the electrical contacts.

Lower the lock lever and press it down 
until it locks firmly into place.

Raise the gray lock lever.

3

4

5

2

1

POWER

lamp

POWER

button

Serial number

Protective tape

Shipping tape

Plug the power cord into the back of the 
printer and connect the other end to a 
power outlet.

Open the front cover. The printhead holder
automatically moves to the center.  Remove 
the protective tape.

Write down the serial number located to 
the right of the printhead. You will need 
this later to register the product.

3

4

5

1 Remove the shipping tape from the front 

and sides of the printer. 

2

USB port

Press the POWER button to turn the 
printer ON.

Ink tanks

       

BCI-3eC Cyan 

BCI-3eM Magenta

BCI-3eBK Black 

BCI-3eY Yellow

Power cord

S630 Series

Color Bubble Jet Printer

Documentation 

and software kit

S630 BJ (Bubble Jet) Printhead

Paper rest

Output tray

Carefully remove all items from the box.

1

Related Manuals for Canon S630

0.594468s