Canon S500 Instruction Guide

Canon Printers and Multifunction Instruction Guide - S500.
Download
Page  of 2
4.9, 2361 votes
background image

Install the Ink Tanks

Unpack the Printer

2

3

4

5

Prepare the Printer

Install the Printhead

Color Bubble Jet™ Printer

Connect the Printer 

To Your Computer

S500

Start Here

Easy Setup Instructions 

(IEEE 1284 compliant)

Turn the printer off.

Parallel Cable

For USB Cables:

For Parallel Cables:

1

Connect one end of the USB cable 
to the computer, the other to the printer.

2

2

Turn the printer off.

1

Connect one end of the parallel cable to 
the computer, the other to the printer.

IMPORTANT: Be sure printer is off 
before continuing, or the computer 
will attempt to install the printer 
driver before the printer is ready.

IMPORTANT: Be sure printer is off 
before continuing, or the computer 
will attempt to install the printer 
driver before the printer is ready.

Continue with Step 6

on side two.

USB Port

USB Cable

Parallel Port

Secure 

Wire Clips

Parallel Cable

1

2

Pull the orange tab off the yellow ink tank 
(BCI-3eY), then remove and discard the 
plastic wrapper.

Twist off and discard the orange 
protective cap.

NOTE: To avoid spilling ink, never press on 

the sides of an ink tank.

Insert the ink tank into the correct slot.
(Refer to the color guide on the printhead.)

Press down gently until the ink tank locks
into place.

Insert the remaining three ink tanks into
their assigned slots.

3

4

Close the front cover and attach the 
paper rest and output tray. 

5

3

Protective cap

Electrical contacts

1

Gently slide the printhead into the holder.
The printhead will rest at a slight angle. 
Do not press it down.

4

Remove the printhead from its package.

Turn the printhead over, then remove 
the orange protective cap. 

2

NOTE: Do not touch the electrical contacts.

5

Lower the lock lever and gently press 
it down until it locks into place.

Raise the gray lock lever.

Press the POWER button.

1

Shipping Tape

POWER

Light

POWER

Button

Protective tape

Serial number

Plug the power cord into the back of the 
printer and connect the other end to a 
power outlet.

2

3

Open the front cover. The printhead holder
automatically moves to the center.  Remove 
the protective orange  tape.

Write down the serial number located to 
the right of the printhead. You will need 
this later to register the product.

5

4

Ink Tanks

       

BCI-3eC Cyan 

BCI-3eM Magenta

BCI-3eBK Black 

BCI-3eY Yellow

Remove the orange shipping tape 
from the front and sides of the printer. 

Carefully remove all items from the box.

1

Power Cord

S500 Series

Color Bubble Jet Printer

Documentation 

and Software Kit

S500 BJ (Bubble Jet) Printhead

Paper Rest

Output Tray

Related Manuals for Canon S500

0.564995s