Canon PIXMA MX492 User's Manual | Page 272

Canon Printers and Multifunction User's Manual - PIXMA MX492.
Download
Page  of 1004
4.1, 1860 votes
background image

Edit Accessible IP Address Screen/Add Accessible IP Address
Screen

Note

• This screen is not available depending on the printer you are using.

The example screenshots in this section refer to the Add Accessible IP Address Screen.

1. Specification Method:

Select either Single Address Specification or Range Specification to add the IP address(es).

Single Address Specification

Specify each IP address separately.

Range Specification

Specify a range of successive IP addresses.

2. IP Address:

Enter the IP address of a computer or a network device to allow access when you selected Single
Address Specification
 in Specification Method:.

An IP address is expressed as four values ranging from 0 to 255.

Start IP Address:

Enter the first IP address in the range of addresses of the computers or network devices to allow
access when you selected Range Specification in Specification Method:.

An IP address is expressed as four values ranging from 0 to 255.

End IP Address:

Enter the last IP address in the range of addresses of the computers or network devices to allow
access when you selected Range Specification in Specification Method:.

An IP address is expressed as four values ranging from 0 to 255.

Note

• The Start IP Address: must be a smaller value than the End IP Address:.

3. Comment:

Optionally enter any information to identify the device, such as the name of the computer.

Important

• Comments will be displayed only on the computer used to enter them.

272

Related Manuals for Canon PIXMA MX492

0.604766s