Canon PIXMA iP3300 Instruction Guide

Canon Printers and Multifunction Instruction Guide - PIXMA iP3300.
Download
Page  of 2
4.4, 1435 votes
background image

Start Here

Easy Setup Instructions

Unpack the Printer

• Please confirm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the printer with your computer.

QT5-0406-V01

a

 Place the printer on a flat and horizontal surface, 

and do not place any objects in front of the 

printer. Open the Sheet Feeder Cover and pull 

out the Paper Support. Open the Front Feeder 

and extend the Output Paper Support.

 Caution

Before turning on the printer, remove all of the shipping tapes.

 Important

Do not connect the USB cable until after the software is in-

stalled.

Plug the power cord in the back of the printer and 

connect the other end to the wall outlet.

 Important

Plug the power cord all the way in, since it may be difficult to 

plug.

Press the 

POWER button to turn on the printer.

1 Prepare the Printer

Open the Top Cover. The Print Head Holder 

moves to the center.

Top Cover

e Write down the serial number located inside the 

printer. You will need this to register your product.

Serial Number Location

3 Install the Ink Tanks

2 Install the Print Head

Remove the Print Head from its package.

 Caution

There may be some transparent or light blue ink on the inside 

of the bag the print head comes in, or the inside of the protec-

tive cap - this has no effect on print quality. Be careful not to 

get ink on yourself when handling these items.

Remove the orange protective cap from the Print 

Head and discard it.

Protective Cap

Electrical Contacts

Print Head Nozzles

 Note

Do not touch the print head nozzles and the electrical contacts.

Firmly raise the Print Head Lock Lever until it 

stops.

Insert the Print Head.

Do not touch!

Lower the Print Head Lock Lever carefully.

 Important

If the Top Cover is left open for more than 10 minutes, the Print 

Head Holder moves to the right. Close and reopen the Top 

Cover to return the Holder to the center.

Peel back the orange tab completely and remove 

the plastic wrapper from the ink tank.

If the orange-colored protective film is not removed 

completely, problems with printing may occur.

Twist off and discard the orange protective cap 

located on the bottom of the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

 Important

• Do not touch the electrical contacts.

• Do not touch the ink port.

Insert the ink tank into the right-hand slot and 

press the   mark on the ink tank until it clicks 

into place.

Make sure the ink lamp lights red.

Insert all ink tanks in order from 

right to left according to the 

colored label.

Close the Top Cover.

 Important

• The printer starts operating. Wait about 2 minutes until the 

printer stops making noise.

• When printing for the first or second time after setup, the 

printer will take a minute or two before it becomes ready to 

print.

 Note

If the 

ALARM lamp on the printer flashes orange after you have 

closed the Top Cover, refer to “ALARM Lamp Flashes Orange” in 

“Troubleshooting” of the Quick Start Guide.

Hardware setup is complete.

Loading Paper
This printer offers two paper sources to load printing 

paper; the Auto Sheet Feeder, found at the top of the 

printer, and the Front Feeder, found at the front of the 

printer.

 Note

• At purchase, the printer is set to feed from the Auto Sheet 

Feeder. For details on how to change the paper source, 

refer to “Basic Printing” of the Quick Start Guide.

• You can load A4, Letter, or B5-sized plain paper in the Front 

Feeder. When using any other type of paper, load it in the 

Auto Sheet Feeder.

Auto Sheet Feeder

Front Feeder

Loading Paper in the Auto Sheet Feeder

Load the paper in the Auto Sheet Feeder 

with the print side facing UP.

Align the paper stack against the Cover 

Guide on the right side of the Paper Support.

Pinch the Paper Guide and slide it against 

the left side of the paper stack.

Paper Guide

Print side facing UP.

Cover Guide

Loading Paper in the Front Feeder

Load the paper in the Front Feeder with the 

print side facing DOWN and the leading 

edge to the far side.

Align the right edge of the paper stack 

against the inner face of the Front Feeder, 

and the near and left edges with the Paper 

Size Mark.

Pinch the Paper Guide and slide it against 

the left side of the loaded paper stack.

Paper Guide

Print side facing DOWN.

 Note

For details, refer to the Quick Start Guide.

Photo Printer

 series

Related Manuals for Canon PIXMA iP3300

0.631743s