Bushnell Legend 1200 User's Manual | Page 6

Bushnell Film Camera User's Manual - Legend 1200.
Download
Page  of 140
4.7, 1185 votes
background image

6

GETTING STARTED

INSERTING THE BATTERY
Remove the battery cap by lifting the battery door tab and then rotating counter clockwise. Insert a CR-2 3-volt 

lithium battery into the compartment positive end first, then replace the battery cap.

NOTE: It is recommended that the battery be replaced at least once every 12 months.   

ADJUSTING THE EYEPIECE 
Your Legend® 1200 ARC™ is constructed with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows one to 

focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are 

in focus to your eye. 

OPERATIONAL SUMMARY 

While  looking  through  the  6x  eyepiece,  depress  the  power  button  once  to  activate  the  in-view  Liquid  Crystal 

Display (LCD). Place the aiming circle (located in the center of the field of view) upon a target at least 5 yards away, 

depress and hold the power button down until the range reading is displayed near the bottom of the in-view display.  

Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, 

you can release the power button. The crosshairs surrounding the aiming circle will disappear once the power button 

has been released (i.e. the laser is no longer being transmitted). Note: Once activated, the LCD will remain active and 

display the last distance measurement for 30 seconds. You can depress the power button again at any time to distance 

to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time 

with magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button 

down again.

0.522053s