Brother XL3022 User's Manual | Page 2

Brother Sewing Machine User's Manual - XL3022.
Download
Page  of 59
4.5, 1850 votes
background image

"IMPORTANT SAFETY INSTRUCTIONS"

When using the sewing machine, basic safety precautions should always be followed,

including the following:

"Read all instructions before using."

DANGER – To reduce the risk of electric shock:

1. The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine

from the electrical outlet immediately after using and before cleaning .

2. Always unplug before changing the light bulb. Replace bulb with same type rated a 15 watt.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1.

Do not allow this machine to be used as a toy. Close attention is necessary when the sewing machine is used
by or near children.

2.

Use this sewing machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.

3.

Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer
or service center for examination, repair, electrical or mechanical adjustment.

4.

Never operate the sewing machine with any of the air openings blocked. Keep the ventilation openings of
the sewing machine and foot controller free from the accumulation of lint, dust and loose cloth.

5.

Never drop or insert any object into any openings.

6.

Do not use this machine outdoors.

7.

Do not operate this machine where aerosol (spray) products are being used or where oxygen is being
administered.

8.

To disconnect, turn the main switch to the symbol “O” position which represents off, then remove plug from
outlet.

9.

Do not unplug by pulling on the cord. To unplug, grasp the plug and pull, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use a bent needle.
13. Do not pull or push the fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sewing machine to the off, symbol “O” position  when making any adjustments in the needle area,

such as threading the needle, changing the needle, threading the bobbin, or changing the presser foot.

15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when

making any other user service adjustments mentioned in this instruction manual.

"SAVE THESE INSTRUCTIONS"

"This sewing machine is intended for household use."

Related Manuals for Brother XL3022

0.514504s