Brother LX-910D User's Manual | Page 25

Brother Laminators User's Manual - LX-910D.
Download
Page  of 50
4.8, 1433 votes
background image

- 23 -

Manual feeding and manual cutting
You can feed and cut the document manually using the Cool Laminator.

(1) Set the document on the document tray.

(2) Press “Feed” to feed the document manually.

The “Feed” button is a self-repeating key. The
document will continue to be fed until the
Feed” button is released. Keep pressing the
Feed” button until you see the end of the
document.

(3) Press          (cut button). The document will be cut

at its current position. If you cannot remove the
document from the machine after this procedure,
use the Feed button and press          (cut button).

Note
-For safety, the exact cutting position is not

visible from outside of the machine.

-To avoid accidentally cutting through your

document, it is recommended that you press
   only after the document has been
completely ejected from the machine.

-Never remove a document from the machine

by force. If necessary, use scissors.

0.538103s