Brother BAS-611 Owner's Manual | Page 16
10
LK3-B434E Mark II
Connection location
X, Y, Sewing sensor
Synchronizer
Machine specification
select connector
Thread wiper solenoid*
Thread take-up solenoid
Presser solenoid
Thread trimmer solenoid
Pulse motor, Y
Pulse motor, X
Operation panel
Upper shaft motor
No. of pins
12-pin
5-pin
8-pin
5-pin
4-pin
4-pin (blue)
4-pin
26-pin
3-pin
Cord mark
z
x
c
v
b
n
m
None
None
Connection location on circuit board
P1 (ORG2)
P2 (SYNCHRO)
P3 (SELECT)
P4 (SOL2)
P5 (SOL)
P6 (YPM)
P7 (XPM)
P8 (PANEL)
P11 (UVW)
Machine head connectors
EMERGENCY STOP switch
Solenoid valve (for pneumatic)
6-pin
12-pin
⁄8
None
P18 (HEAD)
P14 (AIR)
w
q
!1
!0
r
P11
P7
P6
P5
P4
e
P3
P2
P1
P8
!3
!2
q
o
u
i
y
t
* Provided as an option for solenoid specifications.
3-13. Connecting the cords
1. Gently tilt back the machine head.
NOTE:
After tilting back the machine head, do not push the face side or the pulley side from above.
2. Pass the cords
q through the hole w in the work table.
3. Gently return the machine head to its original position.
4. Remove the six screws
e, and then open the control box cover (main P.C. board mounting plate r).
NOTE:
When opening the cover, hold it securely so that it does not fall down.
5. Loosen the two screws
t, and then open the cord presser plate y in the direction of the white arrow and
pass the cords
q through the opening.
6. Loosen the screw
o, and then attach the ground cord u for the machine head and the ground cord i for
the operation panel as shown in the illustration.
7. Loosen the screw
!1, and then attach the ground cord !0 for the upper shaft motor as shown in the illustra-
tion.
8. Securely connect connectors P1 to P8, P11, P14 (for pneumatic) and P18 as indicated in the table.
3. INSTALLATION
9. Secure the cords
q with the cord clamps !2 and !3.
10. Close the cord presser plate
y in the direction of the black arrow, and secure it by tightening the screws t.
NOTE:
Check that the cords do not get pulled when the machine head is tilted back gently.
P18
P14
Related Manuals for Brother BAS-611
-
Logitech Misc Electronics O-R0004 Quick Start Manual
2 pages
-
Brother Misc Electronics DB2-B755 MKIII Owner's Manual
4 pages
-
Panasonic Misc Electronics KX-TG6572R Owner's Manual
64 pages
-
Technics Misc Electronics SA-AX720 Owner's Manual
36 pages
-
RCA Misc Electronics RCR504BR Owner's Manual
2 pages
-
RCA Misc Electronics RCRN04GR Owner's Manual
2 pages
-
Intermatic Misc Electronics GM40AVE Owner's Manual
12 pages
-
Intermatic Misc Electronics ET70115 and ET70215 Owner's Manual
20 pages
-
Intermatic Misc Electronics ET1705C Owner's Manual
4 pages
-
Kidde Misc Electronics Firex 2650-560,2650-561 English MA2650 Owner's Manual
6 pages
-
Trane Misc Electronics XL800 Owner's Manual
8 pages
-
Trane Misc Electronics XL803 Owner's Manual
8 pages
-
Trane Misc Electronics XL624 Owner's Manual
8 pages
-
Trane Misc Electronics XL600 Owner's Manual
8 pages
-
Trane Misc Electronics XL80 Owner's Manual
12 pages
-
Trane Misc Electronics XR80 Owner's Manual
12 pages
-
Trane Misc Electronics XB80 Owner's Manual
12 pages
-
Troy-Bilt Misc Electronics CS 4325 Chipper Shredder Owner's Manual
36 pages
-
Troy-Bilt Misc Electronics TB146 EC 4-Cycle Garden Cultivator Owner's Manual
16 pages
-
Troy-Bilt Misc Electronics TB516 EC Lawn Edger Owner's Manual
12 pages
-
Troy-Bilt Misc Electronics Colt FT Garden Tiller Owner's Manual
36 pages
-
Linear Misc Electronics AP-4 Owner's Manual
2 pages
-
Brother Misc Electronics KE-430F Parts Manual
68 pages
-
Hunter Misc Electronics XC Programming Instructions Manual
18 pages