Bose Wave music system III Owner's Manual | Page 6

Bose Audio Owner's Manual - Wave music system III.
Download
Page  of 28
4.6, 2344 votes
background image

6 – English

SETTING UP YOUR WAVE

® MUSIC SYSTEM 

III

Unpacking

Please check the shipping carton for the following items:

*The appropriate power cord(s) for your region is supplied.

Selecting a location

• Place your Wave

® music system 

III on a table or other 

flat surface.

• To enjoy maximum audio performance, place your 

Wave

® music system 

III across the room from where 

you will be listening.

• For best audio performance, place your Wave

® music 

system 

III within two feet of a wall, and avoid placing 

directly in a corner.

Notes:

• Do not place your Wave

® music system 

III on a metal 

surface. It could interfere with AM reception.

• Do not place your Wave

® music system 

III on a heat-

sensitive surface. Like all electrical equipment, it gener-
ates some heat.

• Do not use your Wave

® music system 

III in a damp 

location or any other place where moisture can get 
inside.

Connecting to power

1.

Insert the small end of the power cord into the con-
nector labeled AC POWER on the rear panel of your 
Wave

® music system 

III.

2.

Plug the power cord into an electrical outlet.

3.

Unwind and straighten the power cord to ensure the 
best FM radio reception. The power cord is used as 
an antenna.

Setting the clock

After plugging in your Wave

® music system 

III, set the 

clock using the remote. Your Wave

® music system 

III is 

easily operated using the remote control. Just aim the 
remote at the front panel and press the necessary buttons. 

1.

Press and hold down either Time button for 
about 1 sec.

Initially, HOLD_TO_SET appears on the display and 
then quickly changes to – CLOCK SET – as the 
button is depressed.

2.

Release the selected Time button.

3.

Press Time – to adjust the displayed time backward 
or press Time + to adjust the displayed time for-
ward until it matches the current time. You can also 
press and hold for rapid adjustment.

4.

Wait five seconds for the system to exit the clock 
setup mode automatically.

Notes:
• To change the clock display from 12-hour (AM/PM) time 

to 24-hour time, see “Changing the time format” on 
page 18.

• If  the  Wave

® music system 

III loses power due to a 

power outage or uplugging the unit to move it, all system 
settings will be permanently retained. However, the clock 
time will only be temporarily stored in backup memory for 
up to 48 hours.

Wave

® music system 

III

®

AC power cord(s)*

Remote control 

(battery installed)

Demonstration CD

1

2

AC POWER

3

Note: Press-and-hold operations 
require holding the button down for 
about one second.

Seine_A_OG.book  Page 6  Wednesday, November 9, 2011  9:04 AM

0.455930s