Bosch SHXM78W56N Instruction Manual | Page 12

800 Series 24" Bar Handle Dishwasher SHXM78W56N Black
Download
Page  of 92
4.7, 1594 votes
background image

en-us   Rinse Aid

12

,  Rinse  Aid

Rinse Aid

To achieve proper drying, always use 

a liquid rinse aid, even if your 

detergent contains a rinse aid or 

drying additive.
Note: The dishwasher indicates low 

rinse aid by turning on the Rinse Aid 

indicator on the display 8. If this 

indicator lights up, you need to refill 

the rinse aid dispenser 9* by 

following the directions below.

Adding rinse aid

NOTICE
To avoid oversudsing or clogging, do 

not overfill the rinse aid 

dispenser 9*. Wipe up any spills 

with a damp cloth.

1. Open the rinse aid dispenser 9* 

by pressing on the latch of the lid 

and pull it open.

2. Add liquid rinse aid to the 

dispenser 9* until it is full. Do 

not overfill. Avoid spilling into air 

vent hole.

3. Close the lid. Lid must be fully 

closed until it clicks in order to 

seal.

4. Wipe up any excess rinse aid that 

may have puddled when the 

dispenser reservoir is full.

The indicator light will go out a few 

moments after the dishwasher door 

is shut.

Tip:  For easier pouring, remove lid 

from the rinse aid bottle.

NOTICE
Do not fill the rinse aid dispenser 9* 

with detergent. Doing so will damage 

the dishwasher.

Setting the amount of rinse 

aid used
The amount of rinse aid dispensed 

can be set from §:‹‹ to §:‹‡. The 

factory setting isʤ:ܠ.
You should only change the setting if 

streaks remain on the dishes (lower 

the amount), or if dishes are not 

getting dry enough (increase the 

amount).

2

1

Setting

Amount

§:‹‹

dispenser is OFF

§:‹‚

lowest setting 

§:‹ƒ

low setting

PD[

vent 

air 

0.594303s