Bosch SHX863WB5N Instruction Manual | Page 30

Bosch Dishwasher Instruction Manual - SHX863WB5N.
Download
Page  of 100
4.4, 2173 votes
background image

en-us   Operating the Dishwasher

30

1  Operating  the 

Dishwasher

Operating the Dishwa er

Note: With hidden controls, the door 

must be opened before changing 

settings and closed after changing 

settings.

9

WARNING
RISK OF INJURY!

To avoid risk of injury, always 

use caution when opening the 

door during or following a wash 

cycle as hot water or steam 

may escape. Do not fully open 

the door until water noises have 

stopped and steam has 

subsided.

Protection against 

unintentional operation
Your dishwasher is equipped with a 

function that helps to prevent 

unintentional operation (e.g. by 

children). 
After setting the dishwasher, the 

dishwasher door has to be closed 

within 4 seconds, otherwise the 

operation will be paused. There will 

be a signal on the control panel 

advising you to press the Start button 

again and close the door.

This function will be activated when:

pressing Start to begin a wash 

cycle

setting Delay time and pressing 

Start

opening the door while Delay time 

is active

opening the door during a wash 

cycle.

Note: This function cannot be 

deactivated.

AquaSensor
The AquaSensor is an optical 

measuring device which measures 

the cleanliness of the rinse water.
The AquaSensor is used according 

to the wash cycle. If the AquaSensor 

is active, “clean” rinse water can be 

transferred to the next rinse and 

water consumption can be reduced 

by 0.8–1-5 gal (3–6 liters). If the 

rinse water is not yet clear, the water 

is drained and is replaced with fresh 

water. In the automatic wash cycles 

the temperature and running time 

can also be adjusted to the degree of 

soiling.

Switching the appliance on

1. Turn the water supply on fully.

2. Open the door.

3. Press the On/Off button (. 

The display of the last selected 

wash cycle flashes. This wash 

cycle remains selected if no other 

wash cycle button 0 is pressed. 

The expected wash cycle duration 

flashes on the display 8.

Select any desired option.

4. Press Start button P.

Wash cycle sequence starts.

Note: Your dishwasher is protected 

against unintentional operation. If the 

appliance door remains open for 

more than 4 seconds after pressing 

the Start button, the operation will be 

paused. Press the Start button again 

and close the appliance door.

0.624960s