Bosch NITP668SUC Installation Instructions | Page 5

Bosch Induction Cooktops Installation Instructions - NITP668SUC.
Download
Page  of 28
4.4, 1097 votes
background image

5

Prepare Installation Space

Create the cut-out in the countertop according to the 

installation diagram. The angle of the cut surface to the 

countertop must be 90°.
The lateral cut-out edges must be flat in order to ensure 

that the retaining springs are positioned properly on the 

appliance. With multi-layered countertops, secure strips 

laterally in the cut-out if necessary.
After creating cut-out, remove shavings. Seal cut 

surfaces in a heat- and water-resistant manner.
Observe minimum distance between device underside 

and cabinet surfaces of 3/8" (10 mm).
The worktop into which the cooktop is installed must be 

heat-resistant up to 140° F (90 °C).
The worktop must be reinforced if it is less than 4/5 inch 

(20 mm) thick.
If the thickness of the worktop into which the cooktop is 

installed does not comply with the specifications, 

reinforce the worktop using a fire- and water-resistant 

material until it reaches the minimum thickness. 

Otherwise, sufficient stability cannot be assured.

The worktop into which the cooktop is installed should 

withstand loads of approx. 133 lbs (60 kg).

Only check the evenness of the cooktop after it has 

been installed.

Cutout dimensions for 30" cooktops
Models: NIT5068UC, NIT8068SUC, NIT8068UC, 

NITP068SUC, NITP068UC

PLQPP

PP

PP

PLQPP

ƒ

[

¡

PP

PLQPP

PLQ

PP

PLQ

PP

0.582241s