Bosch NGM8646UC Installation Instructions | Page 9

Bosch Gas Cooktop Installation Instructions - NGM8646UC.
Download
Page  of 40
4.8, 2001 votes
background image

9

Install the Cooktop
Insert the cooktop into the cutout. Attach the clamps of 

the mounting brackets packaged with the cooktop. Use 

the washer and screws provided.

Adjust the mounting brackets to desired position and 

tighten screws to cooktop. Insert adjusting screw into 

clamp and secure cooktop to countertop.

Attaching Mounting Brackets

Note:  For solid surface material installations:

Insert a wooden block between the end of the screw

and the bottom of the countertop.

Do not overtighten adjusting screw.

Trim excess aluminum tape around cooktop flange.

Tip: Install hold down bracket without the adjusting 

screw installed. Turn hold down brackets flush with the 

sides of the cutout. This will help with inserting cooktop in 

hard-to-reach spaces.

Connect Gas Supply
The gas inlet to the unit is located at the right rear of the 

cooktop.

Install the pressure regulator (supplied with unit) to 

manifold pipe using Teflon tape on threads of manifold 

pipe. Turn to hand tighten plus 1/4 turn, not exceeding 1 

turn for alignment. To prevent possible damage to the 

gas pressure regulator, install it after the cooktop is in its 

permanent position. When the regulator is securely 

installed on the manifold pipe, the conversion nut will be 

easily accessible.

Pressure Regulator

9

WARNING

Do not attempt any adjustment of the pressure 

regulator, except when converting to propane. 

Adjustments could lead to leaks or cause incorrect 

gas pressure to the appliance.

A

Cooktop

B/H Hold Down Bracket

C/E Adjusting Screw

D

Foam Tape (Seal)

G

Wooden Block (to be used with solid surfacing 

material)

$

%

*

(

+

'

&

A

Manifold Pipe

B

Conversion Nut

C

Pressure Regulator

$

%

&

Related Manuals for Bosch NGM8646UC

0.600258s