Bosch NGM5456UC Installation Instructions | Page 8

Bosch Gas Cooktop Installation Instructions - NGM5456UC.
Download
Page  of 40
4.4, 2414 votes
background image

8

Installation Procedure

Prepare the Countertop

9

WARNING

To avoid electrical shock hazard, before installing 

the cooktop, switch power off at the service panel to 

prevent the power from being switched on 

accidentally.

Cut out the countertop per the dimensions shown in the 

section “Cabinet Requirements”.

Some solid surface materials require different cutting 

methods. Consult with the solid surface manufacturer for 

the correct cutting method needed. Apply heat reflective 

tape such as Scotch Aluminum Foil Tape #425 or #427 

(not included) around the cutout so that it folds over the 

top and sides. Do not wrap the tape underneath the 

cooktop. Be sure the tape extends beyond the outermost 

flange of the cooktop. All corners should be covered with 

tape.

Solid Surface Countertops-Counter Cutout

Seal the Cooktop with Foam Tape
Note:  
Failure to install the foam tape may affect burner 

performance.

Apply the self adhesive foam tape in one continuous 

rectangle directly to the counter around the perimeter of 

the cutout as shown by the dotted line in the image 

below. The foam tape should be flush with the edge of 

the cutout.

Foam Tape Placement-Counter Cutout

$

A

Heat Reflective Tape

A

Foam Tape Placement

$

Related Manuals for Bosch NGM5456UC

0.587837s