Bosch NETP668SUC Instruction Manual | Page 9

Bosch Electric Cooktops Instruction Manual - NETP668SUC.
Download
Page  of 68
4.6, 2411 votes
background image

9

Residual heat indicator
The cooktop is equipped with a residual heat indicator 

for each element. It shows you which elements are still 

hot. Avoid touching the indicated elements.
If an • is shown on the display, the element is still hot. 

You could use it, for example, to keep a small quantity of 

food warm or to melt a chocolate coating. As the element 

continues to cool, the display changes to œ. The display 

goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on 

after a power failure. The display lights up for 

approximately 30 minutes.

Operation

Main power switch
Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the On/Off touch key. An acoustic signal will 

sound. The __ indicator located on top of the On/Off 

touch key and the symbols for the cooking zones light 

up. ‹.‹ lights up next to the cooking zones. The cooktop 

is ready to use.

Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out. 

The cooktop is switched off. The residual heat indicators 

will remain on until the elements have cooled off 

sufficiently.
Notes

The cooktop switches off automatically when all the 

elements have been switched off for more than 

20 seconds.
The residual heat indicator remains lit until the 

elements have cooled down sufficiently. •/œ is 

displayed next to the corresponding element symbol.

The settings will be stored for 4 seconds after turning 

off the cooktop. If you turn the cooktop back on during 

that time the cooktop will continue with those settings.

Setting the cooktop
This section will show you how to set the elements. The 

table contains details on the heat settings for a variety of 

dishes.

Setting the element
Select the desired heat level using the number keys 

1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is 

indicated by .5 in the element display and is set by 

touching the Ú symbols between the number keys.

ò Triple element

The element has to be selected.

Add middle heating ring: Touch the Additional Heating key. The 

ð indicator turns on.

Add outer heating ring: Touch the Additional Heating key again. The 

ò indicator turns 

on.

Deactivate: Touch the Additional Heating key again. The 

ò indicator turns off. The inner 

heating ring remains on.

à Bridge element

The bridge element combines two individual heating elements into one long griddle zone. 

This configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).
One of the two elements that belong to the bridge element has to be selected.

Activate: Touch the Bridge Join/Split key. The 

à indicator appears; ‹ appears in both 

heating element displays. Set the desired heat setting.  "Setting the cooktop"

If a heat level was set on one of the elements before, this heat level will be used for the 

bridge element. If two different heat levels were set on the two elements before, the bridge 

element will use heat level ‹.

Change heat level: Select one of the two elements that belong to the bridge element and 

set the new heat level.

Deactivate: Touch the Bridge Join/Split key. 

‹ appears in both displays. The front heating 

element remains selected. Setting the heat level to ‹ does not split the bridge element.

Element

Turning on and off

Related Manuals for Bosch NETP668SUC

0.599516s