Bosch NETP668SUC Installation Instructions | Page 4

Bosch Electric Cooktops Installation Instructions - NETP668SUC.
Download
Page  of 24
4.2, 1784 votes
background image

4

Before you begin

Befor you bgin

Tools and parts needed

Phillips Head Screwdriver

Pencil

Drill with ¼" (6 mm) bit

Jigsaw

Tape Measure

Note:  Additional materials may be necessary for 

installation in solid surface countertops. Contact the 

countertop manufacturer.

Parts included

Cabinet Requirements
The distance from the top of the cooktop to the bottom of 

cabinets above must be a minimum of A=30" (762 mm). 

This distance can be reduced to A=24" (610 mm) when 

the bottom of the wood or metal cabinet is protected by 

not less than ¼" (6.35 mm) flame-retardant millboard 

covered with not less than no. 28 gauge sheet metal, 

0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) 

aluminum or 0.020" (0.5 mm) copper.
Verify that the cabinets above the cooktop are a 

maximum of B=13" (330 mm) deep.

Countertop Requirements

9

WARNING

To reduce the risk of ignition of surrounding 

combustible materials, install at least 2" (51 mm) 

from both sidewalls and the rear wall.

The countertop must be level and horizontal. The stability 

of the countertop must be maintained after the cut-out 

has been made.
Solid surface countertops often require special 

installations. For example, heat-reflective tape and 

rounded corners may be necessary. Contact the 

countertop manufacturer for instructions specific to your 

countertop.

%

$

Related Manuals for Bosch NETP668SUC

0.573668s