Bosch NET8068UC Instruction Manual | Page 10

Bosch Electric Cooktops Instruction Manual - NET8068UC.
Download
Page  of 56
4.3, 1247 votes
background image

10

Residual heat indicator
The cooktop is equipped with a residual heat indicator 

for each element. It shows you which elements are still 

hot. Avoid touching the indicated elements.
If an • is shown on the display, the element is still hot. 

You could use it, for example, to keep a small quantity of 

food warm or to melt a chocolate coating. As the element 

continues to cool, the display changes to œ. The display 

goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on 

after a power failure. The display lights up for 

approximately 30 minutes.

Operation

Main power switch
Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the On/Off touch key until the indicator above the 

main switch and the temperature level indicators ‹ next 

to the heating elements turn on.

Turning the cooktop off
Touch the On/Off touch key. The indicator above the On/

Off key goes out. The cooktop is switched off. The 

residual heat indicators will remain on until the elements 

have cooled off sufficiently.
Notes

The cooktop switches off automatically when all the 

elements have been switched off for more than 

10 seconds.

The residual heat indicator remains lit until the 

elements have cooled down sufficiently. •/œ is 

displayed next to the corresponding element symbol.

Setting the cooktop
This section will show you how to set the elements. The 

table contains details on the heat settings for a variety of 

dishes.

Setting the element
Select the desired heat level using the number keys 

1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is 

indicated by . in the element display and is set by 

touching the û symbols between the number keys.
Selecting the heat level
The cooktop must be turned on.
1. Touch the 

$ key for the desired element. The ‹ and _ 

indicators light up.

2. Within the following 10 seconds set the desired heat 

setting using the number keys. To set an intermediate 

level touch the û symbols between the number keys.

ð Dual element

The heating element has to be selected.

Activate: Touch 

ö once. The ð indicator turns on.

Deactivate: Touch 

ö again. The ð indicator turns off.

à Bridge element

The bridge element combines two individual heating elements into one long griddle zone. 

This configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).
One of the two elements that belong to the Bridge element has to be selected.

Activate: Touch the 

à key. The à indicator appears; ‹ lights up in both element displays. 

Set the desired heat setting.  "Setting the element"

Changing heat level: Touch one of the two 

$ touch keys for selecting the Bridge element. 

Set the new heat setting.

Deactivate: Touch one of the two 

$ keys of the bridge element, and touch the number 

key 0. ‹ appears in both displays. The heating elements turn off and the residual heat indi-

cator appears.

Elements

Turning on and off

Always use cookware of a suitable size.

Related Manuals for Bosch NET8068UC

0.581010s