Bosch HMV5053U Installation Instructions | Page 7

Bosch Over-The-Range Microwaves Installation Instructions - HMV5053U.
Download
Page  of 32
4.4, 2345 votes
background image

7

Appliance dimensions

Note:  Take into account that the front and rear 

measurements of the appliance are not identical.

Power Requirements
The outlet must be properly grounded in accordance with 

all applicable codes.
It can be installed anywhere inside the cabinet above the 

appliance, within reach of the power cord (approx. 24 in).

Electrical Installation

The model stated on the front cover is rated at 120V AC, 

60 Hz and uses a NEMA 5-15 plug to connect to a 

dedicated 120 V microwave circuit.

Electrical Requirements:

a three prong grounded outlet

120 V, 60 Hz, AC only

15 Amp electrical supply with a fuse or a circuit 

breaker

This product must be connected to a supply circuit of the 

proper voltage and frequency. Wire size must conform to 

the requirements of the National Electric Code or the 

prevailing local code for this rating. The power supply 

cord and plug should be brought to a separate 20-amp 

branch circuit single grounded outlet. The outlet box 

should be located in the area behind the appliance (see 

section Cabinet Dimensions). The outlet box and supply 

circuit should be installed by a qualified electrician and 

conform to the National Electrical Code or the prevailing 

local code.
The voltage used must be the same as specified on this 

microwave oven. Using a higher voltage is dangerous 

and may result in a fire or oven damage. Using a lower 

voltage will cause slow cooking. The manufacturer is not 

responsible for any damages resulting from the use of 

the oven with any voltage other than specified.

ê

PP

ê

PP

ʎ¼ʚ

PP

ʎ¼ʚ

PP

Model

Connection

Circuit 

Requirements

HMV5053U

NEMA 5-15

120 V, 

60 Hz

15 Amps

HMV8053U

NEMA 5-15

120 V,  

60 Hz 

15 Amps

HMV8044U

NEMA 5-15

120 V,  

60 Hz 

15 Amps

0.664125s