Bosch HMC80242UC Installation Instructions | Page 5

Bosch Ovens Installation Instructions - HMC80242UC.
Download
Page  of 32
4.9, 1730 votes
background image

5

Before you begin

Befor you bgin

Tools and parts needed

Philips head screwdriver

1/8" drill bit and drill

Measuring tape

Parts included

Microwave oven

Philips head screws

Power Requirements
The outlet must be properly grounded in accordance with 

all applicable codes.
It can be installed in the back wall directly behind the 

appliance.
You can also connect your appliance directly to a 

compatible conventional Built-in Oven. Refer to separate 

Combination Instructions.

Checklist for Installation

Use this checklist to verify that you have completed each 

step of the installation process. This can help you avoid 

common mistakes.
Refer to detailed instructions for each step in the 

sections following this checklist.
1. Before installing the appliance, be sure to verify the 

cabinet dimensions are correct for your appliance and 

that the required electrical connections are present. 

Make sure the electrical conduit provided on the 

appliance is able to reach to the point of connection.
Section: Dimensions and Cabinet Requirements

2. Move the appliance into place in front of the cabinet 

opening.
Section: Removing Packaging

3. Remove packaging materials, leaving the bottom 

packaging on the appliance to avoid damage to the 

floor.
Section: Removing Packaging

4. Team-lift the appliance directly into the cabinet cutout.

Section: Install Appliance, "Mount to Cabinet”

5. Slide the appliance all the way into place.

Section: Install Appliance, "Mount to Cabinet”

6. Fasten the appliance to the cabinet opening with the 

screws supplied.
Section: Install Appliance, "Mount to Cabinet”

Always read and follow the complete installation 

instructions contained in this manual.

Removing Packaging

NOTICE:  To prevent damage to your floor keep the unit 

in its packaging base until ready to be placed in the 

cabinet opening. Do not slide the unit across the flooring.
Different models use different packaging materials. 

Bracket remains in packaging base.
1. Cut straps on outside of box.
2. Remove cardboard box.
3. Remove all top and side cardboard and Styrofoam 

braces.

4. Place oven in front of cabinets where it is to be 

installed.

NOTICE:  To avoid damage to the microwave oven, do 

not grip or use the door or door handle while the 

microwave oven is being handled.

0.601554s