Bosch HBL8752UC Installation Instructions | Page 9

Bosch Combination Ovens Installation Instructions - HBL8752UC.
Download
Page  of 56
4.4, 1350 votes
background image

9

Installation with the Speed Oven or 

Microwave
Notes

Do not place the oven into the wall cabinet until after

mounting the speed oven on top of the lower oven and

securing it with the universal connector brackets.

The universal connector brackets are interchangeable

for the left and right sides of the oven. Be sure the

taller vertical edge of the bracket is positioned to the

outside of the oven.

1. Install both universal connector brackets on top of the

lower oven using six (6) of the screws provided.

Tighten screws securely, but do not overtighten.

2. Install decorative trim.

3. Place the speed oven or microwave unit on top of the

universal connector brackets and fasten in place using

three (3) screws per side. Tighten the screw securely,

but do not overtighten.
Note:  The existing screws in the speed oven base

help with alignment. When lowering the speed oven or

microwave into place on the universal connector

brackets, allow these screw heads to slide into the

slots as shown in the illustration below. The screw

nearest the front of the speed oven or microwave

should slide into the base of the slope at the front of

the bracket.

4. Continue to “Connecting the Speed Oven or Steam

Convection Oven Electrical Conduit to the Lower

Oven”.

Oven Mounting Screws 

(8)--screws are included 

to secure the oven trim to 

the cabinet. The screws 

are located in a small 

plastic bag affixed to the 

literature pack bag.
Trim Piece--in plastic bag 

on top of oven.

Position the decorative 

trim piece so the flanges 

with the holes in them 

face to the rear of the 

oven.

Align the outer flanges 

with the outside of the uni-

versal brackets. Fasten 

with one (1) screw each 

into the end hole of each 

universal bracket. 

Tighten screws securely, 

but do not overtighten.

0.620346s