Bosch B30IR800SP Instruction Manual | Page 6

Bosch Refrigerators Instruction Manual - B30IR800SP.
Download
Page  of 45
4.3, 1769 votes
background image

en-us

6

Scope of Delivery
After unpacking all parts, check for any damage 

in transit.
If you have any complaints, please contact the dealer 

from whom you purchased the appliance or our 

Customer Service department.
The following parts are included:

Built-in appliance

Interior fittings (depending on model)

Bag containing installation materials

Operating Instructions

Installation Instructions

Customer Service Booklet

Warranty enclosure

Information on the energy consumption and noises.

Connecting the Appliance
Have a technician install and connect the appliance 

according to the enclosed Installation Instructions.
Do not remove the transportation protection devices 

from the shelves and storage compartments until 

the appliance has been installed.
Apart from statutory national regulations, you should 

comply with all applicable local electricity companies 

codes and requirements.
After installing the appliance, wait at least 1 hour before 

switching the appliance On. During transportation 

the oil in the compressor may have flowed into 

the refrigeration system.
Before switching the appliance On for the first time, 

clean the interior of the appliance (see chapter 

“Cleaning the Appliance”).

Electrical Connection
WARNING: 

RISK OF ELECTRIC SHOCK
Connect the appliance to a grounded, 3-phase 

outlet only. Never remove the ground phase. Do 

not use any adapters.Do not use any extension 

leads.

WARNING: 

RISK OF ELECTRIC SHOCK

Incorrect connection of the appliance may result 

in death, fire or electric shock. Improper 

connection of the protective conductor may 

result in electric shock. If you are in doubt as to 

whether the appliance has been properly 

grounded, have it tested by a qualified electrician 

or Customer Service technician.

WARNING: 

RISK OF ELECTRIC SHOCK

If the length of the power cord is inadequate, 

never use multiple outlets or extension leads. 

Instead, please contact Customer Service for 

alternatives.

This appliance must be connected to a permanently 

installed outlet.
The outlet must be near the appliance and also freely 

accessible following installation of the appliance.
The appliance complies with protection class I. Connect 

it to a correctly installed outlet. Correct means: with a 

protective conductor, 110 V – 120 V/60 Hz alternating 

current. The outlet must be protected by a 10 A – 16 A 

fuse.
The appliance comes with a UL registered 3-wire power 

cord. The appliance requires a 3-pole outlet.
Please observe the following table with regard to this.

Check on the rating plate whether the indicated voltage 

and current type match the values of your power 

supply. 

The position of the rating plate can be found in the 

chapter entitled Customer Service.

WARNING: 

Never connect the appliance to electronic energy 

saver plugs.
Our appliances can be used with mains and sine 

controlled inverters. Mains-controlled inverters 

are used for photovoltaic systems which are 

connected directly to the national grid. Sine 

controlled inverters must be used for isolated 

applications (e.g. on ships or in mountain 

lodges) which are not connected directly to the 

national grid.

Appliance

Maximum Simultaneous Load

Refrigerator 30“

2.0 amps

Related Manuals for Bosch B30IR800SP

0.663638s