Bosch 800 Series24" Recessed Handle Dishwasher with Home Connect Installation Instructions | Page 5

Bosch Dishwasher Installation Instructions - 800 Series24" Recessed Handle Dishwasher with Home Connect.
Download
Page  of 30
4.6, 1915 votes
background image

5

Electrical Supply Cable

  -  Minimum  #14 AWG,  2  conductor,  1 

ground, insulated copper conductors rated 75°C or higher

Hot Water Supply Line - Minimum 3/8″ O.D. copper tubing or metal 

braided dishwasher supply line

Shut-off valve and fittings appropriate for hot water supply line 

(copper tubing/compression fitting, or braided hose)

UL listed conduit connector or strain relief is required if you attach 

the field wiring directly to the terminal block

Hammer

Hole Saw

Pipe Wrench

Tape Measure

Slot Screwdriver

Phillips Screwdriver

Torx T-20 Screwdriver

Wire Cutter

Wire Stripper

Ø 2 mm (1/16 in) Drill

Level

Adjustable Wrench

Tools and Materials Needed

Inspect the Dishwasher

After unpacking the dishwasher and prior to installation, 

thoroughly inspect the dishwasher for possible freight 

or cosmetic damage. Report any damage immediately. 

Cosmetic defects must be reported within 30 days of 

installation.

NOTE: Do not discard any bags or items that come with the 

original package until after the entire installation has been 

completed.

5

Related Manuals for Bosch 800 Series24" Recessed Handle Dishwasher with Home Connect

0.596979s