Bosch 100 Series24" Bar Handle 100 Series Instruction Manual | Page 41

Bosch Dishwasher Instruction Manual - 100 Series24" Bar Handle 100 Series.
Download
Page  of 100
4.6, 1456 votes
background image

Troubleshooting   en-us

41

Dishes not dry. Rinse aid dispenser 9" is empty 

or incorrect rinse aid amount is set.

Add rinse aid or adjust setting - the use of 

rinse agent improves drying, use the Auto 

cycle, use the Sanitize option.

Extra Dry heat option not chosen.* Activate Extra Dry heat option.*
Water collected in depressions on 

the dishes and silverware.

Arrange dishes in upper rack to slope so 

water can drain.

Door was opened or dishes 

removed before wash cycle was 

completed.

Wait until wash cycle ends before opening 

door or removing dishes. 

Plastics don’t absorb heat like cut-

lery or china and don’t dry as well.

Use more intensive wash cycles (with hotter 

rinse water) or activate Extra Dry heat 

option.*

Silverware not arranged properly in 

the silverware basket or top rack.

Arrange silverware properly and separate 

them so they don’t contact each other.

Odor
Note: Water 

testing is done 

in the factory. 

Occasionally 

water may still 

appear in dish-

washer at pur-

chase which 

may create an 

odor.

Food debris in the dishwasher 

sump and door seal.

Clean sump filters, sump and door seal as 

needed. ~  "Care and Maintenance" 

on page 34

Food debris left on dishes too long. Run dishwasher more frequently.
Not using rinse aid or using 

improper detergent.

Use rinse aid and the proper detergent.

Residual standing water in the 

sump.

Make sure previous wash cycle has finished.

Drain line is clogged or drain hose 

is kinked, clogged or blocked. Or 

drain hose was not installed with a 

high loop.

Unclog drain line or replace drain hose. Be 

sure drain hose is installed with high-loop.
Note: If odor still persists, run the Normal/ 

Regular cycle until it flushes and interrupt 

the cycle and place an 8 oz. cup of distilled 

white vinegar solution on the upper rack and 

then finish the cycle.

Dishwasher 

isn’t filling with 

water (or 

“Check water 

supply” display 

occurs)

Water supply hose is kinked.

Install new supply hose (without kinks).

Previous wash cycle was not com-

pleted or current wash cycle was 

interrupted.

Complete wash cycle or reset dishwasher.

Delay start or Child lock may be 

activated.

Reset Delay start or Child lock functions 

(refer to the appropriate sections in this 

manual).

Water supply line is clogged.

Unclog water line.

Water supply was turned off.

Turn on water supply.

Fascia panel is 

discolored or 

scratched.

Panel was cleaned with 

bleach-based wipes or abrasive 

cleaners/cleaning pads.

Use mild detergents with soft damp cloth.

0.664881s