Bosch 100 Series24" Bar Handle 100 Series Instruction Manual | Page 39

Bosch Dishwasher Instruction Manual - 100 Series24" Bar Handle 100 Series.
Download
Page  of 100
4.6, 1456 votes
background image

Troubleshooting   en-us

39

Dishwasher 

does not start.

Door may be ajar or not be properly 

latched.

Close door securely until door latch clicks.

No power to the dishwasher (dis-

play won’t come on). Fuse may 

have been blown, circuit breaker 

may have tripped, power cord may 

have been unplugged or dish-

washer may have been turned off.

Replace blown fuse or reset tripped circuit 

breaker. Plug power cord into outlet 

securely. Press the on/off button ( to 

turn the dishwasher on.

Can’t select a wash cycle since the 

previous wash cycle may not have 

finished or the dishwasher hasn’t 

been reset.

Reset the dishwasher by pressing and hold-

ing the START button for at least three sec-

onds. 

Delay start or Child lock may be 

activated.

Reset Delay start or Child lock functions 

(refer to the appropriate section in this man-

ual). 

The door may have been closed 

without selecting a wash cycle.

Select a wash cycle and close the door.

Water supply may not be turned on 

or connected.

Check and turn on water supply.

Wash cycle 

won’t resume 

after door was 

opened and 

closed.

The door has been open for more 

than 4 seconds after pressing the 

Start button.

Press Start button again and close the dish-

washer door within 4 seconds (see “Protec-

tion against unintentional operation” section 

in this manual).

Display does 

not illuminate.

A fuse may have been blown or cir-

cuit breaker tripped.

Check the fuse or circuit breaker box and 

replace the fuse or reset the breaker if nec-

essary.

Door not closed or latched.
Note: For models with controls on 

top of the door, the display only illu-

minates when the door is opened 

and controls are visible.

Ensure door is properly latched and com-

pletely closed.

0.613344s