Black & Decker CBM210B Use & Care Manual

Black & Decker Coffee Grinder Use & Care Manual - CBM210B.
Download
Page  of 2
4.4, 2000 votes
background image

Please Read and Save this Use and Care Book. 
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions 

should always be followed, including the following:

Read all instructions.

To protect against risk of electric shock, do not immerse 

cord, plug or any non-removable parts in water or other 

liquid.

Close supervision is necessary when any appliance is used 

by or near children.

Unplug from outlet when not in use, before putting on or 

taking off parts and before cleaning. To unplug, grasp plug 

and pull from electrical outlet. Never pull cord.

Avoid contacting moving parts.

To reduce the risk of severe injury to persons or damage 

to the appliance, keep hands and utensils out of the 

grinding bowl while grinding, and when the appliance is 

plugged in.

Do not operate any appliance with a damaged cord or 

plug or after the appliance malfunctions or is dropped 

or damaged in any manner. Return the appliance to the 

nearest authorized service facility for examination, repair, 

or electrical or mechanical adjustment. 

The use of attachments not recommended or sold by the 

appliance manufacturer may cause fire, electric shock or 

injury.

Do not use outdoors.

Do not let cord hang over edge of table or counter.

Blades are sharp. Handle carefully.

Be certain cover is securely locked in place before 

operating appliance.

Do not attempt to defeat the cover interlock mechanism.

Check container for presence of foreign objects before 

using.

Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To 

reduce the risk of electric shock, this plug is intended to fit into a polarized 

outlet only one way. If the plug does not fit fully into the outlet, reverse the 

plug. If it still does not fit, contact a qualified electrician. Do not attempt to 

modify the plug in any way.
TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw 

to prevent removal of the outer cover. To reduce the risk of fire or 

electric shock, do not attempt to remove the outer cover. There are 

no user-serviceable parts inside. Repair should be done only by 

authorized service personnel. 

ELECTRICAL CORD

a)  A short power-supply cord is to be provided to reduce the risk 

resulting from becoming entangled in or tripping over a 

longer 

cord.

b)  Longer extension cords are available and may be used  

if care is exercised in their use.

c) If an extension cord is used,

1)  The marked electrical rating of the detachable  

power-supply cord or extension cord should be at  

least as great as the electrical rating of the appliance,

2) If the appliance is of the grounded type, the extension cord 

should be a grounding-type 3-wire cord, and

3)  The longer cord should be arranged so that it will not drape 

over the countertop or tabletop where it can be pulled on by 

children or tripped over.

Note: If the power supply cord is damaged, it should be replaced 

by qualified personnel or in Latin America by an authorized service 

center.

How to Use
This product is for household use only.
GETTING STARTED
•  Wash removable parts as instructed in CARE AND CLEANING.
•  When in use, grinder must be placed on a level surface.
•  To assure stability, thread electrical cord to one side of cord wrap, 

then through the channel with cord exiting out the rear of the base.

Note: For your protection, appliance contains a dual safety 

mechanism. Do not attempt to use appliance unless the cover is 

closed and ground coffee container is in place.
GRINDING
1. Open grinding bowl cover.
2. Place up to 1 cup (about 227 g) of coffee beans into grinding bowl. 

This yields about 16 tablespoons (277 g) of ground coffee—enough 

for about 12 cups (2 L ). Do not grind a full cup of beans on the fine 

setting as it may cause unit to clog. 

3. Turn grind selection dial to desired grind texture. Refer to 

GRINDING GUIDELINES. Experiment with the texture of your grind 

to see what works best with your coffeemaker.

4. Plug in the grinder.
5. Press and hold the ON/OFF ( ) pulse control button until beans are 

ground.

GRINDING GUIDELINES
Selecting grind setting:
Brew Method 

Grind 

Setting Appearance

Percolator or 

Coarse 

Like Kosher salt 

French Press
Drip or Vacuum 

Medium 

Like coarse-ground pepper

Espresso  

Fine  

Like fine bread crumbs

The proper grind is important for the best coffee flavor. The quicker 

the brewing process, the finer the grind used. Coffee that is ground 

too fine for a particular brewing process will result in bitter, pungent 

tasting coffee. Coffee that is ground too coarse will result in weak, 

watery coffee.
Grind time and yield:
Amount of beans  

Time 

Yield

¼ cup (57 g)  

30 to 35 seconds 

4 tbsp.

½ cup (113 g)  

50 to 55 seconds 

8 tbsp.

¾ cup (170 g)  

60 to 65 seconds  

12 tbsp.

1 cup (227 g)  

approximately 

16 tbsp. 

 

1½ minutes

6. When grinding is done, remove ground coffee container from 

the grinder by pulling it away from unit; lift lid up and off. Scoop 

directly from the ground coffee container.

Care and Cleaning

This product contains no user serviceable parts. Refer service to 

qualified service personnel.
  1.  Always unplug the unit before cleaning.
  2.  Remove ground coffee container with lid and wash in warm, soapy 

water by hand.

  3.  Use cleaning brush to sweep away any excess particles left in the 

ground coffee chute.

Important: The ground coffee chute must be kept clear, or the ground 

coffee container will not lock into position once it is replaced, and the 

grinder will not operate properly.
  4.  Open grinding bowl cover and turn the lock-and-release knob 

clockwise to unlock the grinding assembly. You will hear a series of 

clicks and the grind selection dial will rotate as you twist;, and then a 

distinct pop when the assembly is unlocked.

  5.  Remove grinding assembly and wash in warm, soapy water. Rinse 

and dry thoroughly. You can use cleaning brush to sweep out any 

excess particles gathered under grinding assembly. Once all excess 

particles have been removed, wash in warm soapy water.

  7.  Wipe the grinding bowl, cover, base and other parts with a slightly 

damp cloth or sponge. Dry all parts thoroughly before reassembling.

  8.  To replace grinding assembly, set inside grinding bowl and twist 

slightly to the left until it falls into place. Grasp lock-and-release 

knob and turn counterclockwise to lock assembly. You will hear a 

series of clicks as the grind selection dial rotates, and then a distinct 

pop once the assembly is locked in place.

Important: Do not immerse grinding bowl, base or plug in liquid or 

under running water.
  9.  Never use harsh detergents or abrasive cleansers or scouring pads 

to clean any part.

10.  Use the built-in cord wrap on the underside of the unit to store the 

cord. 

is a registered trademark of The Black & Decker Corporation, 

Towson, Maryland, USA

Made and Printed in People’s Republic of China

Product may vary slightly from what is illustrated. 

MODEL CBM210B

USA/Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

ELECTRIC COFFEE GRINDER

†  1.  Cover (Part # CBM200-01)
  2.  Lock and release knob
  3.  Grinding bowl
  4.  Ground coffee chute
†  5.  Ground coffee container (Part # CBM200-02)  

 

  with lid (Part # CBM200-03)

  6.  Base
  7.  Cord
†  8.  Cleaning brush (Part # CBM200-04)
  9.  ON/OFF pulse control button ( )
  10.  Grind selection dial
  11.  Grinding assembly
Note: † indicates consumer replaceable/removable parts

© 2011 Applica Consumer Products, Inc.

2011/2-3-10E/S

NEED HELP?
For service, repair or any questions 

regarding your appliance, call the 

appropriate 800 number in front of 

this sheet. Please DO NOT return 

the product to the place of purchase. 

Also, please DO NOT mail product 

back to manufacturer, nor bring it to 

a service center. You may also want 

to consult the website listed on the 

cover of this manual.

TWO-YEAR LIMITED WARRANTY

(Applies only in the United States 

and Canada)

What does it cover?

•  Any defect in material or 

workmanship provided; however, 

Applica’s liability will not exceed 

the purchase price of product.

For how long?

•  Two years from the date of original 

purchase with proof of such 

purchase.

What will we do to help you?

•  Provide you with a reasonably 

similar replacement product 

that is either new or factory 

refurbished.

How do you get service?

•  Save your receipt as proof of date 

of sale.

•  Visit the online service website at 

www.prodprotect.com/applica, or 

call toll-free 1-800-231-9786, for 

general warranty service.

•  If you need parts or accessories, 

please call 1-800-738-0245.

What does your warranty not cover?

•  Damage from commercial use

•  Damage from misuse, abuse or 

neglect

•  Products that have been modified 

in any way

•  Products used or serviced outside 

the country of purchase

•  Glass parts and other accessory 

items that are packed with the 

unit

•  Shipping and handling costs 

associated with the replacement 

of the unit

•  Consequential or incidental 

damages (Please note, however, 

that some states do not allow 

the exclusion or limitation of 

consequential or incidental 

damages, so this limitation may 

not apply to you.)

How does state law relate to this 

warranty?

•  This warranty gives you specific 

legal rights. You may also have 

other rights that vary from state to 

state or province to province.

Related Manuals for Black & Decker CBM210B

0.647382s