Black & Decker Black & Decker Edger LE750 Type 4 User's Manual

Black & Decker Edger User's Manual - Black & Decker Edger LE750 Type 4.
Download
Page  of 7
4.7, 2176 votes
background image

KEY INFORMATION YOU SHOULD KNOW:

• Your edger is designed to eject clippings and other debris forward, away from the operator.
•    Inspect and thoroughly clean your edger at the start of each edging season.
• The blade on this tool is not intended to be sharp. Do not sharpen it in any way.
• Make sure edging area (100 ft.) is clear of other persons or pets prior to starting operation.

1

A

B

C

D

3

2

CAT. NO. LE750 TYPE 4

FORM NO. 90517808                     

OCT. ‘07

Copyright © 2007 Black & Decker

PRINTED IN CHINA

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA:  LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO. 

INSTRUCTION MANUAL

Catalog No.  LE750 

TYPE 4

BEFORE RETURNING THIS PRODUCT 

FOR ANY REASON PLEASE CALL 

1-800-544-6986 

BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A

BLACK & DECKER 

REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU

HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO 

BLACK & DECKER. 

THANK YOU FOR CHOOSING BLACK & DECKER!

GO TO WWW.BLACKANDDECKER.COM/NEWOWNER

TO REGISTER YOUR NEW PRODUCT

.

WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS

WARNING:

When using electric gardening appliances, basic safety precautions should  

always be followed to reduce risk of fire, electric shock, and personal injury, including the 
following.

WARNING

Some dust created by this product contains chemicals known to the State of 

California to cause cancer, birth defects or other reproductive harm.  Some examples of these 
chemicals are:

• compounds in fertilizers

• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety equipment such as dust
masks that are specially designed to filter out microscopic particles.

WARNING:

This product contains chemicals, including lead, known to the State of

California to cause cancer, and birth defects or other reproductive harm.  Wash hands after
handling.

CAUTION:

Wear appropriate personal hearing protection during use.  Under some 

conditions and duration of use, noise from this product may contribute to hearing loss.

READ ALL INSTRUCTIONS

TO REDUCE RISK OF INJURY:
•  Before any use, be sure everyone using this tool reads and understands all safety

instructions and other information contained in this manual. 

• Save these instructions and review frequently prior to use and in instructing others.

SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. 
The information it contains relates to protecting YOUR SAFETY and PREVENTING 
PROBLEMS. The symbols below are used to help you recognize this information. 

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in

minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation

which, if not avoided, may result in property damage.

READ ALL INSTRUCTIONS

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS

SAFETY WARNINGS AND INSTRUCTIONS: DOUBLE INSULATION

REPLACEMENT PARTS: 

When servicing use only identical Black & Decker replacement

parts. 

IMPORTANT SAFETY INSTRUCTIONS: POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider
than the other). This equipment must be used with a suitable polarized 2 wire or 3 wire
extension cord. Polarized connections will fit together only one way. Make sure that the
receptacle end of the extension cord has large and small blade slot widths. If the plug does not
fit fully into the extension cord, reverse the plug. If it still does not fit, obtain a suitable
extension cord. If the extension cord does not fit fully into the outlet, contact a qualified
electrician to install the proper outlet. Do not modify the appliance plug or extension cord in
any way.

THIS TOOL CAN BE DANGEROUS. 

Follow all warnings and Safety Instructions in this

manual. The operator is responsible for following warnings and instructions in this manual and
on unit. Restrict use of this power tool to persons who read, understand and follow warnings
and instructions in this manual and on unit.

•  AVOID DANGEROUS ENVIRONMENT.  Don’t use appliances in damp or wet locations. Don’t

use appliances in the rain.

• KEEP CHILDREN AWAY. All other persons and pets should be kept at a safe distance from

work area.  

• STORE IDLE APPLIANCES INDOORS. Appliances should be stored indoors in dry,  secured

area – out of reach of  children.

• DON’T FORCE APPLIANCE.  It will do the job better and with less likelihood of a risk of injury

at the rate for which it was designed.

• USE RIGHT APPLIANCE. Do not use the appliance for any job except that for which it is

intended. 

• DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving

parts. Rubber gloves, long pants and substantial, non-skid footwear are recommended when
working outdoors. Do not go barefoot or wear sandals. Wear protective hair covering to
contain long hair.

• USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or safety

glasses with side shields, complying with applicable safety standards and, when needed, a
face shield. Also use face or dust mask if operation is dusty. This applies to all persons in the
work area. Also use a hard hat, hearing protection, gloves, safety shoes and dust collection
systems when specified or required. Safety glasses or the like are available at extra cost at
your local dealer or Black & Decker Service Center. 

• DON’T ABUSE CORD. Never carry appliance by cord or yank it to disconnect from

receptacle. Keep cord from heat, oil, and sharp edges. 

• DON’T OVERREACH. Keep proper footing and balance at all times.
• MAINTAIN APPLIANCE WITH CARE.  Keep cutting edge clean for best performance and to

reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect
appliance cord periodically and if  damaged, have it repaired by authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and
free from oil and grease.

• DISCONNECT APPLIANCES. Disconnect the appliance from the power supply when not in

use, before servicing, and when changing accessories such as blades and the like.

• AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in appliance with finger on

switch. Be sure switch is off when plugging in.

•  EXTENSION CORDS. Make sure your extension cord is in good condition. Cord insulation must

be intact with no cracks or deterioration. Plug connectors must be undamaged. When using an
extension cord, be  sure to use one heavy enough to carry the current your product will draw. An
undersized  extension cord will cause a drop in line voltage resulting in loss of power and
overheating, which can shorten the life of the motor.  The table shows the  correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage.
The smaller the gage number, the heavier the cord. 

indicates the Edger is “DOUBLE INSULATED”

• OUTDOOR USE EXTENSION CORDS 

WARNING: 

To reduce the risk of electric shock,

use only with an extension cord intended for outdoor use, such as an extension cord of type
SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A. 

• GROUND FAULT CIRCUIT INTERRUPTER (GFCI)  protection should be provided on the

circuits or outlets to be used for the gardening appliance. Receptacles are available having
built in GFCI protection and may be used for this measure of safety.

• STAY ALERT. Watch what you are doing. Use common sense. Do not operate appliance

when you are tired, ill or under the influence of any drugs or alcohol. 

• CHECK DAMAGED PARTS. Before further use of the appliance, a guard or other part that is

damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this manual.

• REPAIRS AND SERVICE. Repairs, maintenance and any adjustments not specified in this

manual should be performed by Black & Decker authorized service centers or other qualified
service organizations, always using identical replacement parts.

• USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory or attachment

not recommended for use with this appliance could be hazardous. Note: Refer to the
accessory section of this manual for further details.

ADDITIONAL WARNINGS FOR EDGERS

1. Keep guard in place.
2. Keep blade area clean.

DANGER: Risk of injury. Keep hands and feet away from blade and cutting area.

WARNING:

When using the edger, stones, pieces of metal and other objects can be thrown out at high
speed by the blade. The tool and guard are designed to reduce the danger. However, the fol-
lowing special precautions should be taken:
1. Wear safety glasses or other eye protection, gloves, long pants and substantial footwear.
2. Make sure that other persons and pets are at least 100 feet away. 
3. Always stand to left side of main handle.
4. Before Landscaping or Trenching, check for buried electrical cables.
5. To reduce the risk of rebound (ricochet) injury, work going away from any nearby solid 

object such as a wall, steps, large stone, tree, etc. Use great care when working close to
solid objects or into the wind, and, where necessary, do edging or trimming by hand.

SAVE THESE INSTRUCTIONS

Minimum Gage for Cord Sets

Volts

Total Length of Cord in Feet

120V

0-25

26-50

51-100

101-150

(0-7,6m)

(7,6-15,2m)   (15,2-30,4m) (30,4-45,7m)

240V

0-50

51-100

101-200

201-300

(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)

Ampere Rating
More

Not more

American Wire Gage

Than

Than

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10

-

12

16

16

14

12

12

-

16

14

12

Not Recommended

4

0.603473s