Black & Decker 2227 User's Manual

Black & Decker Air Compressor User's Manual - 2227.
Download
Page  of 4
4.6, 1761 votes
background image

INSTALLATION  INSTRUCTIONS

Congratulations on your purchase of a new  Level Command

kit.  This kit was designed to provide inflation control of your
air helper springs.  This kit will be an asset to your vehicle,
meeting nearly all of your air supply needs.

Please take a few minutes to read through the instructions,

identify the components, and learn how to properly install your
Level Command kit.

NOTE:

The Level Command kit can be used with all air helper

spring products.  If you are installing an air suspension system,
do not install the air line tubing to the air springs as stated in
the suspension system instruction manual.  If you are adding
the Level Command kit to an existing air suspension system,
you will need to deflate the air springs and remove the air line
tubing.

NOTE ON CONNECTING THE AIR LINE TUBING:

Cut the air line tubing as squarely as possible.  To connect

the air line tubing to the fittings, push the tubing into the fittings
as far as possible.  If for any reason the tubing must be removed,
first release the air pressure from the air helper spring.  Push the
collar toward the body of the fitting and the pull out the tubing.
To reassemble, make sure the tubing is cut squarely and push
the tubing back into the fitting.

TOOLS REQUIRED:

•  3/16" DRILL BIT

•  3/8" DRILL BIT

•  1/4" DRILL BIT

•  POWER DRILL

•  WIRE CRIMPER/STRIPPER

•  PLIERS

•  PHILLIPS SCREW DRIVER

•  UTILITY KNIFE

•  (2) 7/16" WRENCHES

•  CENTER PUNCH

0

150

30

120

60

90

200

400

600

800

1000

psi

kPa

PSI

SINGLE AIR CONTROL PANEL

1

COMPRESSOR

9210

1

30 FT. AIR LINE TUBING

1

1/8" NPT PUSH-TO-CONNECT

STRAIGHT FITTING

3055

1

PUSH-TO-CONNECT

T-FITTING

3025

2

10 -32 x 1" MACHINE SCREW

5

10 -32 LOCK NUT

5

24-8204

        03-01

    NAD-30665-2

2097 / 2187 / 2227 / 2233

PARTS LIST

LEVEL COMMAND

#10 FLAT WASHER

7

15 FT. 16 GAGE WIRE

1

IN-LINE FUSE HOLDER

1

20 AMP BLADE FUSE

1

FEMALE SPADE CONNECTOR

2

MALE SPADE CONNECTOR

1

RING TERMINAL

1

WIRE CONNECTOR

2

NYLON TIE

15

LEVEL COMMAND

WITH

 9210 COMPRESSOR

Related Manuals for Black & Decker 2227

0.510011s