Bissell DEEPCLEAN PREMIER User's Manual | Page 8

Bissell Vacuum Cleaners User's Manual - DEEPCLEAN PREMIER.
Download
Page  of 16
4.8, 2064 votes
background image

Operations

carpet cleaning 
1. 
Plug into a proper outlet and push power  

button 

 located on front of handle.

2. Recline handle by pressing on recline pedal on 

back of machine behind 2-in-1 water tank.
3. While pressing spray trigger, make one 

slow forward wet pass and another one back. 

Caution: Do not overwet.   
NotE: your machine is equipped with a circuit 

breaker that will automatically shut off the brush 

if a large or loose object is caught in the brush 

roll. If that happens, be sure to unplug your 

machine, remove the foreign object, and then 

plug machine back in to reset circuit breaker. 
4. 
Release spray trigger and make one slow  

forward and backward pass over same area.
5. Repeat cleaning passes until solution being 

suctioned up appears clean. Continue passes 

without pressing spray trigger until you can’t see 

any more water being suctioned up. Repeated 

passes will help aid in dry time. 
NotE: you may notice hair and debris deposits 

on the carpet or in the tank that were loosened 

by the cleaning action. this debris should be 

picked up and thrown away.

cleanShot™ 
Cleanshot is an optional feature that can be 

used to fight tough stains. it can be used as 

either a tough stain pretreat or during the  

deep cleaning process itself. To use Cleanshot 

either as a pretreat, or during deep cleaning,  

follow instructions below.
1. Press Cleanshot button on front of machine’s 

handle and aim focused stream onto stain for  

up to 5 seconds.
2. Allow formula to soak in for 15 seconds.
3. Without pressing spray trigger, run machine 

over stain to extract it until no formula or water 

can be seen coming up from the carpet.
4. Repeat as needed until stain is gone.

AttENtIoN

Some Berber carpets have a tendency to fuzz with wear. 

Repeated strokes in the same area with an ordinary vacuum 

or deep cleaner may aggravate this condition. 

1.

2.

Recline Pedal

www.bissell.com   

   

8

1.

Cleanshot 

button

Power button

cAUtIoN

Brushes may unexpectedly restart. To reduce the risk of 

injury from moving parts, unplug before removing nozzle 

for cleaning or servicing.

 

Also See for Bissell DEEPCLEAN PREMIER

Related Manuals for Bissell DEEPCLEAN PREMIER

0.474985s