Bissell BISSELL Symphony All in One Vacuum and Steam Mop 1132 Owner's Manual | Page 7

Bissell Cleaners Owner's Manual - BISSELL Symphony All in One Vacuum and Steam Mop 1132.
Download
Page  of 12
4.6, 1121 votes
background image

Using your Symphony hard floor  
Vacuum and Steam mop
The hard floor cleaner can be used as a stick 

vacuum and a steam mop at the same time or 

separately. For best results, use the powerful 

vacuum to clear floor of dust and small debris as 

you steam mop.
Your hard floor cleaner is designed to clean hard 

flooring, such as ceramic tile, vinyl, marble, stone 

and sealed hard wood floors. Use on waxed or 

some unwaxed floors may result in a diminished 

glossiness. The hard floor cleaner is not for use 

on unsealed wood floors. For best results, test in  

an inconspicuous area and check the care 

instructions from your flooring manufacturer.
1. Plug the unit in and wait 30 seconds for it to 

heat up. When the steam Ready light illuminates, 

choose the level of steam to clean your floor:  

HI (for durable floors or sticky messes) or  

LO (for delicate floors or every day cleaning).
2. Press steam trigger on the underside of the 

handle to actuate steam
3. Push the VAC switch down to turn on the 

cyclonic vacuum.
4. begin cleaning by slowly passing the unit over 

the floor surface while pressing the steam trigger 

on the underside of the handle. Moisture on the 

floor is normal when using in steam mode.
5. When the hard floor cleaner stops emitting 

steam, turn the unit off (both steam mop and 

vacuum functions) and unplug. Open the easy 

Fill opening of the water tank and use the water 

cup to add more water to the tank. For best 

results, water should be at room temperature. 

Then close the easy Fill opening, turn the unit 

back on and continue cleaning.

Removing mop pad
1. 
Unplug hard floor cleaner from electrical outlet. 
2. step on foot release for mop pad tray and  

lift unit off tray.
3. Carefully remove mop pad from the mop  

pad tray using the Quick Release™ Tab. The  

mop pad and tray may be hot. 
4. Put the mop pad tray back down on the  

floor and set the unit back on top. it will click 

into place.
5. Mop pad can be machine washed in  

warm water. Use only liquid detergents.  

Do not use fabric softeners or bleach.  

For best results, air dry.

   

   www.bissell.com

7

Operations

Maintenance & Care

 

»  To sanitize an area of your 

floor (attacking invisible 

germs and bacteria), place 

the hard floor cleaner over 

the spot for a minimum 15 

seconds using continuous 

steam, but no longer 

than 20 seconds using 

continuous steam. For 

larger areas, overlap mop 

head placement.

Tip

 

»  For vacuum use on low 

pile area rugs, remove 

pad tray for improved 

performance.

Tip

WaRnInG

To reduce the risk of electric shock, turn power switch off 

and disconnect polarized plug from electrical outlet before 

performing maintenance or troubleshooting checks.

WaRnInG

Never put descaling, alcoholic, or detergent products 

into the steam cleaner, as this may damage it or make 

it unsafe for use. 

1. 

2. 

2.

Related Manuals for Bissell BISSELL Symphony All in One Vacuum and Steam Mop 1132

0.517559s