Bissell BISSELL Hard Floor Expert Deluxe Canister Vacuum 1161 Owner's Manual | Page 5

Bissell Vacuum Cleaners Owner's Manual - BISSELL Hard Floor Expert Deluxe Canister Vacuum 1161.
Download
Page  of 24
4.1, 2071 votes
background image

www.BISSELL.com   

   

5

A  Product View

C  Special Features

a. Variable Suction

The Hard Floor Expert is equipped with  

variable suction to easily go from cleaning 

carpets and hard floors to delicate surfaces 

like drapes and upholstery. 
1. Power Button Once the vacuum is 

plugged in, press the main power button to 

activate the remote control (section A #5). 
a. Located on the handle is the remote 

control power button. Use this to place the 

unit on standby (off).
NOTE: If the remote is not working, check 

the placement of the batteries in the handle.
2. Increase Button “+” 
Press to increase  

suction power.
3. Reduce Button “-” Press to decrease  

suction power for use on delicate surfaces. 
NOTE: the lights on the base of the canister 

will indicate the level of suction power 

(section A #5)

.

4. When using the remote control, do not 

cover the infrared emitter or block the 

infrared receiver on the body to ensure 

efficient communication between emitter 

and receiver. 

b. Hard Floor Tool

The hard floor tool is equipped to clean  

hard floor surfaces such as wood, tile, and 

laminate. This tool is ideal for removing fine 

dirt and debris on hard flooring. 
Note: The roller brush will only rotate on 

hard floor surfaces. It can be used to clean 

carpet, but the brush will not rotate. 

c. Carpet Tool
1.
 Multi-surface brush switch has retractable 

brushes to clean both carpet and hardwood 

floor surfaces.
Vacuum Carpeted Areas 

Set the multi-surface brush switch to the  

carpet position (brushes should retract). 
Vacuum Hard Surfaces  

Set the multi-surface brush switch to  

the hard floor position (brushes should  

be visible). 

d. Storage

There are two storage options for your  

Hard Floor Expert: 
1. Locate the groove behind by the post 

motor filter (section A #10) and connect the 

floor tool to the base
Or
2. 
Locate the groove underneath of the 

canister and connect the telescopic wand.

B  Assembly

You do not need any tools to assemble your 

vacuum cleaner.
1. Connect the hose to the canister body. 

Once it snaps, it is in place.
 

 a. To disconnect the hose, squeeze the 

snaps located on the side of the hose 

connection and pull out

2. Connect the handle to the telescopic 

wand by aligning the insert and securing it  

in place. Once it snaps, it is in place. 
3. Connect the desired floor brush to the  

end of the telescopic wand by aligning the 

insert and securing in place. 
3a. To remove, press the snap located on the 

front of the hard floor tool and pull apart 
4. Snap the tool holder in place, under the 

handle.

 

 a. Dusting tool

 

 b. Crevice tool

5. Located on the top of the handle, pop 

open the battery cover and place the two 

AAA batteries in the correct location.

Do not plug in your cleaner until you have 

completely assembled it per the following 

instructions and are familiar with all instructions 

and operating procedures.

Be careful to avoid injury as cord retracts very quickly.

Plastic film can be dangerous. To avoid danger of 

suffocation, keep away from babies and children.

Before using your vacuum, make sure that the dirt 

cup and all filters are in place. Do not operate your 

vacuum without the dirt cup and filters.

CAUTION : RISK OF FIRE. Only replace with 2 AAA 

Alkaline 1.5VDC Bat eries

1  Hose Connector

2  Front Cover

3  Dust Bin (beneath cover)

4  Big Wheel

5  Variable Suction Indicator

6  Cord Rewind Button

7  Power Button

8  Carry Handle

9  Power Cord

10  Post Motor Filter

11  Carpet Tool

12  Hard Floor Tool

13  Telescopic Wand

14  Tool Clip

15  Crevice Tool

16  Dusting Brush

17 Handle

18 Hose

19  2 AAA Bat eries

Related Manuals for Bissell BISSELL Hard Floor Expert Deluxe Canister Vacuum 1161

0.496589s