Bissell 1693 User's Manual | Page 8

Bissell Vacuum Cleaners User's Manual - 1693.
Download
Page  of 16
4.4, 1797 votes
background image

8

This provides floor or upholstery cleaning with the turn of 
a dial. For carpet/floor cleaning make sure the dial is set to 
FLOOR CLEANING. For upholstery or fabric cleaning, select 
your cleaning tool, attach it to the Flex Hose, switch to Tools 
Settings and the PowerSteamer is ready to clean upholstery, 
fabrics and more*

Set the switch to FLOOR CLEANING when cleaning carpets, or set 

it to TOOLS/PRETREAT when using the Flex Hose attachments.

Plan activities to give carpet time to dry.

Remove easily moved furniture from the room (chairs, lamps, 
coffee tables, etc).

Vacuum thoroughly to pick up loose debris and pet hair before 
using the PowerSteamer.

Plan your cleaning route to leave an exit path. It is best to 
begin cleaning in the corner farthest from your exit.

NOTE: You may notice hair and debris deposits on carpet 
that were loosened by brushing action (especially with 
newer carpets that have never been deep cleaned before). 
This debris should be picked up by hand and thrown away. 
Debris that deposits in the brush belt area should be cleaned 
out to keep Belts running free.

Improves cleaning effectiveness for heavily soiled carpet in 
high traffic areas such as entryways and hallways:

Set the ReadyTools™ dial to TOOLS/PRETREAT.

Plug the PowerSteamer into a proper outlet and turn ON the 
Power switch.

While pressing the trigger, slowly make several passes over the 
area to be cleaned. Caution: Do not overwet.

Turn the machine Power switch OFF and let BISSELL Advanced 
Deep Cleaning Formula dissolve the tough soil for 1-2 minutes. 
Reset the ReadyTools Dial to FLOOR CLEANING before continuing.

Plug the PowerSteamer into a proper outlet and turn ON the 
Power switch.

While pressing the Spray Release Trigger, make one slow 
forward and back wet pass. Let the BISSELL Advanced Deep 
Cleaning Formula and DirtLifter PowerBrush* do the work for 
you. Caution: Do not overwet.

Release the trigger and make one slow forward and back pass 
over the same area to remove any residual dirty water.

Repeat cleaning passes without pressing the trigger until you can't see 
any more water being suctioned up.

When cleaning job is complete, refer to the Maintenance/
Storage section on page 11.

1.

2.

3.

ReadyTools™ Dial

Pretreating

TOOLS

PRETREA

T

FLO

OR

CLE

AN

ING

How To Clean Carpet

2

4'

3'

1

3

4

5

6

7

9

10

11

12

EXIT

STAR

HERE

4.

1.

2.

3.

4.

Tip:
Thorough 
vacuuming before 
deep cleaning 
will prevent early 
clogging of the 
lint trap.

Normal Cleaning

1.

2.

3.

4.

5.

ug310-5907_1692-1694_205.indd   8

ug310-5907_1692-1694_205.indd   8

4/18/05   9:19:56 AM

4/18/05   9:19:56 AM

Related Manuals for Bissell 1693

0.553570s