Biostar N68S3+ Owner's Manual | Page 3

Biostar Motherboards Owner's Manual - N68S3+.
Download
Page  of 47
4.4, 1947 votes
background image

N68S3+ 

 

1

CHAPTER 1: INTRODUCTION 

1.1 

BEFORE YOU START 

Thank you for choosing our product. Before you start installing the 

motherboard, please make sure you follow the instructions below: 

 Prepare a dry and stable working environment with 

sufficient lighting.   

 Always disconnect the computer from power outlet 

before operation. 

 Before you take the motherboard out from anti-static 

bag, ground yourself properly by touching any safely 

grounded appliance, or use grounded wrist strap to 
remove the static charge. 

 Avoid touching the components on motherboard or the 

rear side of the board unless necessary. Hold the board 

on the edge, do not try to bend or flex the board. 

 Do not leave any unfastened small parts inside the 

case after installation. Loose parts will cause short 

circuits which may damage the equipment. 

 Keep the computer from dangerous area, such as heat 

source, humid air and water. 

 The operating temperatures of the computer should be 

0 to 45 degrees Celsius. 

 

1.2 

PACKAGE CHECKLIST 

  IDE Cable X 1(optional) 
  Serial ATA Cable X 2 
  Rear I/O Panel for ATX Case X 1 
  Installation Guide X 1 
  Fully Setup Driver CD X 1 (full version manual files inside) 
  FDD Cable X 1 (optional) 
  Serial ATA Power Cable X 1 (optional) 
  USB 2.0 Cable X1 (optional) 
  S/PDIF out Cable X 1 (optional) 

 

Note: The package contents may be different due to area or your motherboard version. 

 

0.552627s