Biostar 865GV Micro 478 Owner's Manual | Page 32

Biostar Motherboards Owner's Manual - 865GV Micro 478.
Download
Page  of 67
4.2, 2107 votes
background image

865GV Micro 478 

30 

c. 

“Auto-overclock button”: User can click this button and 
[WarpSpeeder™] will set the best and stable performance and 
frequency automatically. [WarpSpeeder™] utility will execute a 
series of testing until system fail. Then system will do fail-safe 
reboot by using Watchdog function. After reboot, the 
[WarpSpeeder™] utility will restore to the hardware default 
setting or load the verified best and stable frequency according 
to the Recovery Dialog’s setting. 

d. 

“Verify button”: User can click this button and [WarpSpeeder™] 
will proceed a testing for current frequency. If the testing is ok, 
then the current frequency will be saved into system registry. If 
the testing fail, system will do a fail-safe rebooting. After reboot, 
the [WarpSpeeder™] utility will restore to the hardware default 
setting or load the verified best and stable frequency according 
to the Recovery Dialog’s setting. 

Note:  

Because the testing programs, invoked in Auto-overclock and Verify, 
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or 
newer runtime library is required. And please make sure your display 
card’s color depth is High color (16 bit) or True color (24/32 bit) that is 
required for Direct3D rendering. 

5.  Hardware Monitor Panel 

Click the Hardware Monitor button in Main Panel, the button will be 
highlighted and the Hardware Monitor panel will slide out to left as 
the following figure. 

In this panel, you can get the real-time status information of your 
system. The information will be refreshed every 1 second. 

 

0.512522s