BENDIX BW2825 User's Manual

BENDIX Tire Pressure Monitoring Systems User's Manual - BW2825.
Download
Page  of 1
4.5, 1481 votes
background image

SmarTire™ TPMS Compatibility Chart Notes

*SW: 4.26, 3.17

Limited release; for specific customer applications only; contact Bendix CVS for availability.

REV 1.3 **SW: 2.1

Gauges with SW Version 2.1 or older should be upgraded to Version 2.2 part # 248.0087; contact Bendix 

CVS for upgrade instructions; does not apply to Version 3.0 or higher.

Note 1:  

Some Features not compatible

J1939 Receiver Version 1-3 does not have features such as trailer monitoring and multi-tire autolearn. 

Software upgrade on receiver is required to access these additional features.

Note 2:  

CAN communication limitation; 

some features not supported

1. This version of receiver is able to send RTS/CTS and BAM sessions simultaneously but the gauge 

does not support this. This will cause the gauge to initialize improperly.  

2. This version of receiver has features such as trailer monitoring and multi-tire autolearn which this 

version of the gauge does not support. Software upgrade is required to access these additional features.

Note 3:  

DTC format change

Because the DM1 version is not recommended by the SAE standard, it is recommended to upgrade 

receiver to R1-3, which uses latest DTC format and includes additional enhancements. 

SmarTire™ Tire Pressure Monitoring System (TPMS) Software Compatibility Chart

For all configurations below, always upgrade to the highest software/hardware revision for the gauge/receiver combination. 

Revision and software information can be read on the gauge during start-up. 

If you have:

Rev 1.2 

SW: 1.6

Rev 1.3 

**SW: 2.1

Rev 1.4 

SW: 3.0

Rev 2.0 

SW: 4.1

Receiver Model 

200-0184

(See white label on 

housing for model 
number)

Rev X-X

*Software (SW): 

4.26, 3.17

>>

Software

Can Be

Upgraded

Where 

shown

No

>>

Software

Can Be

Upgraded

From 1.6 to 

2.1

No

A Hardware 

Change was 

Implemented:

Software 

cannot be 

Upgraded from 

2.1 to 3.0

 <|>

 

A Hardware 

Upgrade is 

Required for 

Additional 

Features

Yes 

(See Note 2)

>>

Software

Can Be

Upgraded 

From 3.0 to 

4.1

Yes

Rev 1-3     

SW: 3.13, 2.2

No

Yes

Yes

Yes 

(See Note 1)

Rev 1-2     

SW: 3.11, 2.17

Yes

Yes 

(See Note 3)

Yes 

(See Note 3)

No

Rev 1-1     

SW: 3.09, 2.15

No

No

No

No

Rev 1-0     

SW: 3.08, 2.15

No

No

No

No

Receiver Model 

200-0180

(See white label on 

housing for model 
number)

Rev 1-2     

SW: 1.18, 1.5

No

No

No

No

Rev 1-1     

SW: 1.15,1.5

No

No

No

No

Rev 1-0     

SW: 2.18, 2.09

No

No

No

No

Note:  Legacy Receiver Model 200-0153 is not compatible with any of the above.

Gauge 

Version 

200-0179

BW2825 

©2010 Bendix Commercial Vehicle Systems LLC, 

a member of the Knorr-Bremse Group

7/10 • All Rights Reserved

For more information call: 1-800-AIR-BRAKE

1-800-247-2725 • www.bendix.com

0.587223s