Behringer XENYX QX1204USB Quick Start Guide | Page 7

Behringer Mixers Quick Start Guide - XENYX QX1204USB.
Download
Page  of 20
4.9, 1336 votes
background image

12

13

XENYX QX1204USB/Q1204USB

Quick Start Guide

XENYX QX1204USB/Q1204USB Controls

(1)

(2)

(3)

(4)

(6)

(10)

(7)

(8)
(9)

(5)

(11)

(13)

(15)

(12)

(17)

(14)

(16)

(18)

(19)

(20)

(EN) 

Step 2: Controls

(1) 

USB wireless input accepts a USB 

receiver for use with BEHRINGER ULM 

wireless microphones.

(2) 

GAIN knob adjusts the sensitivity of the 

MIC and/or LINE inputs.

(3) 

COMP knob adjusts the amount of 

compression effect on the channel.

(4) 

EQ knobs adjust the high, mid and low 

frequencies of the channel.

(5) 

AUX knobs adjust how much of the channel’s 

signal is sent to the AUX SEND jacks. 

Pressing the PRE button on the QX1204USB 

sends the AUX 1 signal pre-fader. AUX 1 is 

always sent pre-fader on the Q1204USB.

(6) 

PAN/BAL knob positions the channel in the 

stereo field.

(7) 

MUTE button removes the channel from the 

MAIN MIX and sends it to the ALT 3-4 bus.

(8) 

CLIP LED lights when the channel signal 

begins to overload.

(9) 

SOLO (QX1204USB) button sends the channel 

to the main VU meters for gain setting.

(10) 

CHANNEL FADER adjusts the channel volume.

(11) 

MULTI-FX PROCESSOR (QX1204USB) adds a 

selected sound effect to any channels whose 

FX knob is turned up. See Multi-FX Processor 

section for details.

(12) 

AUX SENDS adjust the amount of signal sent 

to a monitor speaker or effects processor via 

the AUX SEND jacks.

(13) 

AUX RETURNS adjust the amount of signal 

returning from an effects processor that is 

included in the main mix.

(14) 

PHONES/CTRL RM knob adjusts the 

headphone or monitor speaker volume.

(15) 

VU METER displays the MAIN OUTPUT 

signal level. 

(16) 

SOURCE buttons route the USB/2-TR, ALT 3-4 

or MAIN MIX to the PHONES and CONTROL 

ROOM jacks.

(17) 

MODE (QX1204USB) button determines 

whether the channels’ SOLO button 

operates as ‘Solo in Place’ (button out) 

or ‘Pre-Fader Listen’ (button in). PFL is 

preferred for gain setting purposes.

(18) 

ALT 3-4 fader(s) adjust(s) the output of the 

ALT 3-4 jacks.

(19) 

MAIN MIX faders adjust the overall output 

of the mixer.

(20) 

USB/2-TR TO MAIN button routes the USB 

and 2-TRACK signals to the MAIN MIX.  

0.617919s