Behringer Xenyx 802 Owner's Manual | Page 9

Behringer Audio Owner's Manual - Xenyx 802.
Download
Page  of 12
4.4, 1363 votes
background image

9

XENYX 1202/1002/802/502 User Manual

3.2  Audio connections
You will need a large number of cables for different applications. 

The il ustrations below show how the connectors should be wired. Be sure to 

use only high-grade cables.
Please use commercial RCA cables to connect the 2-track inputs and outputs.
You can, of course, also connect unbalanced devices to the balanced inputs/

outputs. To do this, use either mono plugs or stereo plugs with the ring and 

sleeve bridged (pins 1 and 3 in the case of XLR connectors).
◊ Caution! Never use unbalanced XLR connectors (PIN 1 and 3 connected) 

on the MIC input connectors when using the phantom power supply.

output

For unbalanced use, pin 1 and pin 3 

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

input

1

2

3

1

2

3

Balanced use with XLR connectors

Fig. 3.1: XLR connections

strain relief clamp

sleeve

tip

sleeve

(ground/shield)

Unbalanced ¼" TS connector

tip

(signal)

Fig. 3.2: ¼" mono plug

strain relief clamp
sleeve
ring
tip

sleeve

ground/shield

For connection of balanced and unbalanced plugs,

ring and sleeve have to be bridged at the stereo plug.

Balanced ¼" TRS connector

ring

cold (-ve)
tip

hot (+ve)

Fig. 3.3: ¼" stereo plug

strain relief clamp

sleeve
ring
tip

sleeve

ground/shield

¼" TRS headphones connector

ring

right signal
tip

left signal

Fig. 3.4: Stereo plug for headphones connection

0.475184s