Behringer X32 DIGITAL MIXER User's Manual | Page 55
55
X32 DIGITAL MIXER Preliminary User Manual
7.7 Effects Screen
The effects screen controls various aspects of the eight internal effects
processors. On this screen, the user can select specific types of effects for
the eight internal effects processors, configure their input and output paths,
monitor their levels, and adjust the various effects parameters.
The home screen contains the fol owing separate tabs:
1. Home: The home screen provides a general overview for al eight effects
processors, displaying what effect has been inserted in each of the eight slots,
as well as displaying input/output paths for each slot and the I/O signal levels.
2. FX1-8: These eight duplicate screens display all relevant data for the eight
separate effects processors, al owing the user to adjust all parameters for
the selected effect.
7.7.1 Effects Screen: Home Tab
The effects screen’s home tab provides a high-level overview of the eight effect
processor slots, giving the user “at-a-glance” feedback on what effects they
have assigned to the slots, the console source and destination for each processor,
and the input/output levels for each processor.
To make adjustment on the effects screen’s home tab, perform the
following steps:
1. Adjust the 1st encoder to select the input source for the currently highlighted
effect block. Signal path choices include:
• Insert Send
• Mix Bus 1-16
2. Tap the 1st encoder to assign the currently selected input source.
3. Adjust the 2nd encoder to select the input source for the right side of the
currently highlighted effect block.
4. Tap the 2nd encoder to assign the currently selected input source.
TIP: To configure an effect as mono input and stereo output, set both input
sources to the same signal path.
5. Adjust the 5th encoder to scroll among the different available audio effects.
Choices include:
6. Tap the 5th encoder to assign the selected effect to the currently highlighted
effects slot.
7. Adjust the 6th encoder to scroll among the eight effects slots, to select one
for editing.
8. Tap the 6th encoder to go to the edit page for the currently highlighted
effects slot.
7.7.2 Effects Screen: FX 1-8 Tabs:
The effect editor tab al ows you to edit the parameters for the specific effect
processor assigned to the corresponding effects slot.
In order to more closely simulate the look and feel of the outboard processors
that are no longer necessary with a digital console, the individual effects
processor screen provides a graphical representation of the effect processor’s real
world physical counterpart. This provides greater ease of use to the user than a
simple text list of parameters.
To make adjustment on the FX screen’s editing tab, perform the fol owing steps:
1. Adjust the six rotary encoders to change the various effect parameters
shown at the bottom of the screen.
2. Use the Layer up/down buttons to switch the rotary encoders to a second
set of parameters for effects that contain more than six adjustable
parameters total.
3. When the effect processor has been edited to your satisfaction, push the 6th
encoder to go back to the FX home tab (or simply resume the mixing duties
in general).
4. See the FX Descriptions chapter for details on specific parameters.
TIP: For the Graphic EQ effects, tap the 1st encoder to implement the “Graphic EQ
on Faders” function. This al ows you to boost-cut the different EQ bands using the
8 console output faders, 8 faders at a time, with the relevant EQ bands displayed
on the channel LCD screens.
1. Hal Reverb
14. Rotary Speaker
27. Dual Enhancer
2. Plate Reverb
15. Tremolo/Panner
28. Stereo Enhancer
3. Vintage Reverb
16. Delay & Chamber
29. Dual Exciter
4. Vintage Room
17. Chorus & Chamber
30. Stereo Exciter
5. Ambience
18. Flanger & Chamber
31. Stereo Imager
6. Gated Reverb
19. Delay & Chorus
32. Dual Guitar Amp
7. Reverse Reverb
20. Delay & Flanger
33. Stereo Guitar Amp
8. Stereo Delay
21. Dual Graphic EQ
34. Dual Tube Stage
9. 3-tap delay
22. Stereo Graphic EQ
35. Stereo Tube Stage
10. Stereo chorus
23. Dual TruEQ
36. Dual Pitch
11. Stereo Flanger
24. Stereo TruEQ
37. Stereo Pitch
12. Stereo Phaser
25. Wave Designer
13. Mood Filter
26. Precision Limiter
Also See for Behringer X32 DIGITAL MIXER
Related Manuals for Behringer X32 DIGITAL MIXER
-
Yamaha DJ Equipment FX500 Operation Manual
97 pages
-
Yamaha DJ Equipment GF16/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment GF24/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment SPX50D Operation Manual
105 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X1600 User's Manual
32 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X500 User's Manual
63 pages
-
Kenwood DJ Equipment TK-260G User's Manual
50 pages
-
Kenwood DJ Equipment TK-270G User's Manual
50 pages
-
Peavey DJ Equipment DeltaFex Twin User's Manual
23 pages
-
Behringer DJ Equipment Behringer DJ Equipment NOX606 User's Manual
17 pages
-
Behringer DJ Equipment PRO MIXER VMX300 VMX300 User's Manual
13 pages
-
Dynacord DJ Equipment PowerMate 600 User's Manual
64 pages
-
ION DJ Equipment DISCOVER DJ User's Manual
16 pages
-
Lexicon DJ Equipment MPX 550 User's Manual
111 pages
-
Roland DJ Equipment SP-404SX User's Manual
54 pages
-
Samson DJ Equipment XP510I User's Manual
2 pages
-
Allen & Heath DJ Equipment ZED 12 FX User's Manual
36 pages
-
Allen & Heath DJ Equipment ZED 22 FX User's Manual
36 pages
-
Allen & Heath DJ Equipment ZED-10FX User's Manual
32 pages
-
American Audio DJ Equipment q-d6 User's Manual
17 pages
-
American DJ DJ Equipment FS-1000 User's Manual
2 pages
-
Denon DJ DJ Equipment Denon DJ DJ Equipment DN-MC6000 User's Manual
2 pages
-
Stanton DJ Equipment SCS.4DJ User's Manual
64 pages
-
Behringer DJ Equipment X32 DIGITAL MIXER User Manual
70 pages