Behringer Vintage Tube Monster VT999 User's Manual

Behringer Musical Instruments User's Manual - Vintage Tube Monster VT999.
Download
Page  of 2
4.1, 2039 votes
background image

VINTAGE TUBE MONSTER VT999

Classic Vacuum Tube Overdrive

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TUBE MONSTER VT999. 

This high-quality classic tube overdrive pedal is based on a hand-selected BUGERA 12AX7B vacuum tube. 

Get a whole tube amp in a pedal and take off with anything from warm blues overdrive to heavy distortion.

1.  Controls

(1) 

Use the 9 V

𝌂 connection to plug in a 9 V power supply. 

(2) 

Use the POWER switch to activate/deactivate the unit.

(3) 

The POWER LED lights up when the unit is activated.

(4) 

The ¼" TS OUT connector sends the signal to your amp.

(5) 

Use this ¼" TS IN connector to plug in the instrument cable.

(6) 

The THRESHOLD control adjusts the input signal level at which the integrated noise gate starts 

noise reduction.

(7) 

The NOISE GATE switch activates/deactivates the integrated noise gate for noise reduction during 

quiet passages.

(8) 

The GAIN control adjusts the amount of distortion.

(9) 

The TREBLE control al ows you to boost/cut the high-frequency range.

(10) 

The MID control al ows you to boost/cut the mid-frequency range.

(11) 

The BASS control al ows you to boost/cut the low-frequency range.

(12) 

The MASTER control adjusts the output level.

(13) 

The BUGERA 12AX7B vacuum tube is placed here.

(14) 

Use the footswitch to activate/deactivate the effect.

(15) 

The DRIVE LED il uminates when the effect is activated.

The SERIAL NUMBER is located at the bottom.

(1)

(7)

(14)

(11)

(10)

(9)

(2)

(6)

(4)

(5)

(8)

(3)

(12)

(13)

(15)

Related Manuals for Behringer Vintage Tube Monster VT999

0.515438s