Behringer Ultra Tremolo UT300 Owner's Manual

Behringer Musical Instruments Owner's Manual - Ultra Tremolo UT300.
Download
Page  of 2
4.4, 1509 votes
background image

ULTRA TREMOLO UT300

Classic Tremolo Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA TREMOLO UT300. 

This high-quality effects pedal is designed to provide guitarists easy-to-use tremolo effect styles. 

Thanks to its high-performance features you get the classic, warm and mind-bending tremolo effects 

of vintage ‘60s amps.
The tremolo effect is achieved by periodic modulation of the input signal level. This results in a 

continuous change from low to high level that has a quivering, tremulous sound character.

1.  Controls

(1) 

The RATE control adjusts the speed of the tremolo effect. 

(2) 

The DEPTH control adjusts the intensity of the effect.

(3) 

The WAVE control alters the LFO waveform that modulates the input signal from triangle to square. 

This way you can achieve practical y any tremolo sound, from classic to radical styles.

(4) 

The ON/BATT LED il uminates when the effect is activated. It also serves as a battery level indicator.

(5) 

Use the footswitch to activate/deactivate the effect.

(6) 

Use this ¼" TS IN connector to plug in the instrument cable.

(7) 

The ¼" TS OUT connector sends the signal to your amp. 

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). 
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, 

press the hinges with a bal pen and remove the pedal cover. Be careful not to scratch the unit.
◊  The UT300 has no on/off switch. As soon as you insert the jack into the in connector, 

the UT300 begins running. When not using the UT300, remove the jack from the in 

connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

(4)
(1)

(7)

(6)

(2)

(5)

(3)

Related Manuals for Behringer Ultra Tremolo UT300

0.517361s