Behringer PRO MIXER VMX300 VMX300 User's Manual | Page 10
10
PRO MIXER VMX300
3. REAR PANEL
35
Use the AMP output to connect the VMX300 to an amplifier. The level is controlled by the OUT A control
in the MAIN OUT section.
36
The BOOTH output offers a connection for an additional amplifier and/or loudspeaker system. The level
is controlled by the OUT B control in the MAIN OUT section.
+ In order to avoid power-up thumps, which can damage your loudspeakers, please power up
your amplifier last. There should be no signal present, e.g. no music playing, when you turn
on your amp. In addition, we suggest that you set all volume-related controls to zero (down)
before powering up your system. Following these precautions will save you from unpleasant
and potentially dangerous surprises.
37
The TAPE output enables you to record your performance by connecting a tape deck, DAT recorder etc.
Unlike the AMP and BOOTH outputs, the TAPE level is fixed, so that you have to adjust the input level
on the recorder.
38
The POWER ON switch turns on the PRO MIXER.
39
FUSE HOLDER/VOLTAGE SELECTOR. Before you connect the equipment to an AC outlet, please be
sure that the voltage displayed corresponds with your local AC voltage. If you should need to replace the
fuse, be sure to replace it with one of the same type and value. Some units allow you to switch between
230 V and 115 V by rotating the fuse holder.
+ To operate the unit at 115 V, you must install a fuse with a higher ampere rating.
40
This is the socket for the power cable. The impulse behavior of any given amplifier circuit depends
largely upon the power supplys inherent reserves. All mixers contain numerous operational amplifiers
(op-amps) for processing line-level signals. Due to the restricted performance of their power supplies,
many mixers show stress symptoms when used under extreme conditions, resulting in inferior audio
quality. Thanks to its generously proportioned power supply, this will never happen to your VMX300: The
sound will always be clear, transparent and powerful.
41
SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the
date of purchase. This will entitle you to all the benefits of our extended warranty. Alternatively, you can
register online at www.behringer.com.
Related Manuals for Behringer PRO MIXER VMX300 VMX300
-
Behringer DJ Equipment X32 DIGITAL MIXER User's Manual
70 pages
-
Yamaha DJ Equipment FX500 Operation Manual
97 pages
-
Yamaha DJ Equipment GF16/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment GF24/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment SPX50D Operation Manual
105 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X1600 User's Manual
32 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X500 User's Manual
63 pages
-
Kenwood DJ Equipment TK-260G User's Manual
50 pages
-
Kenwood DJ Equipment TK-270G User's Manual
50 pages
-
Peavey DJ Equipment DeltaFex Twin User's Manual
23 pages
-
Behringer DJ Equipment Behringer DJ Equipment NOX606 User's Manual
17 pages
-
Dynacord DJ Equipment PowerMate 600 User's Manual
64 pages
-
ION DJ Equipment DISCOVER DJ User's Manual
16 pages
-
Lexicon DJ Equipment MPX 550 User's Manual
111 pages
-
Roland DJ Equipment SP-404SX User's Manual
54 pages
-
Samson DJ Equipment XP510I User's Manual
2 pages
-
Allen & Heath DJ Equipment ZED 12 FX User's Manual
36 pages
-
Allen & Heath DJ Equipment ZED 22 FX User's Manual
36 pages
-
Allen & Heath DJ Equipment ZED-10FX User's Manual
32 pages
-
American Audio DJ Equipment q-d6 User's Manual
17 pages
-
American DJ DJ Equipment FS-1000 User's Manual
2 pages
-
Denon DJ DJ Equipment Denon DJ DJ Equipment DN-MC6000 User's Manual
2 pages
-
Stanton DJ Equipment SCS.4DJ User's Manual
64 pages
-
Behringer DJ Equipment X32 DIGITAL MIXER User Manual
70 pages