Behringer Overdrive Distortion OD300 User's Manual

Behringer Music Pedal User's Manual - Overdrive Distortion OD300.
Download
Page  of 2
4.2, 1822 votes
background image

OVERDRIVE DISTORTION OD300

Thank  you  for  showing  your  confidence  in  us  by  purchasing  the  BEHRINGER

OVERDRIVE DISTORTION OD300. This effects pedal is ideally suited for electric guitars.

Thanks  to  its  high-performance  features  you  can  create  state-of-the-art  overdrive,

distortion or a combination of both effects.

1. CONTROLS

Top view

The LEVEL control adjusts the output level.
The TONE control allows you to shape your overall sound.
The DRIVE control adjusts the intensity of the overdrive/distortion effect.
Use  the  MODE  control  to  adjust  the  balance  between  overdrive  and  distortion

effect.  In  leftmost  position  you  got  pure  overdrive  effect  and  in  the  rightmost

position you get pure distortion.
The  ON/BATT  LED  illuminates  when  the  effect  is  activated.  It  also  serves  as  a

battery level indicator.
Use  the  footswitch  to  activate/deactivate  the  effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or

replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be

careful not to scratch the unit.

+ The OD300 has no on/off switch. As soon as you insert the jack into the

IN  connector,  the  OD300  begins  running.  When  not  using  the  OD300,

remove  the  jack  from  the  IN  connector.  This  extends  the  life  of  the

battery.

The SERIAL NUMBER is located at the bottom.

Also See for Behringer Overdrive Distortion OD300

0.542941s