Behringer Blues Overdrive BO100 User's Manual

Behringer Musical Instruments User's Manual - Blues Overdrive BO100.
Download
Page  of 2
4.8, 1254 votes
background image

BLUES OVERDRIVE BO100

Thank you for showing your confidence in us by purchasing the BEHRINGER BLUES

OVERDRIVE  BO100.  This  classic  effects  pedal  is  specifically  designed  to  deliver the

warm and emotive distortion usually known from 30-year-old classic tube amps. Thanks

to its high-performance features you will achieve the tone of a vintage and bluesy tube

amp that captures every nuance of your playing. And if you feel like it, you can rock out

with  full-blast  distortion.

1. CONTROLS

Top view

The LEVEL control adjusts the output level.
The TONE control adds tube-like warmth to the overall sound.
Use the GAIN control to adjust the amount of overdrive.
The  ON/BATT  LED  illuminates  when  the  effect  is  activated.  It  also  serves  as  a

battery level indicator.
Use  the  footswitch  to  activate/deactivate  the  effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or

replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be

careful not to scratch the unit.

+ The BO100 has no on/off switch. As soon as you insert the jack into the

IN  connector,  the  BO100  begins  running.  When  not  using  the  BO100,

remove  the  jack  from  the  IN  connector.  This  extends  the  life  of  the

battery.

The SERIAL NUMBER is located at the bottom.

Also See for Behringer Blues Overdrive BO100

Related Manuals for Behringer Blues Overdrive BO100

0.474614s